Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Parts & Accessories
$76.99
Replacement 9T sealed driver body for 49N sealed cartridge bearing rear 20 BMX wheel only (#247591-02).
- Premium steel construction with 4-Pawl engagement (includes spring clip & pawls)
- Includes x2 installed 6802 2RS sealed cartridge bearings
- Weight: 103g
$7.99
EX-1 Disc Quick Release replacement compatible with Expedition 1 Disc Rack.
$37.45
Front disc brake quick release conversion kit from Campagnolo.
- Convert Campagnolo Bora and Shamal disc brake wheels from thru-axle to quick release
- Includes axle, end caps and adjusting sleeve
- Quick release sold separately
$30.80
Fully connected.
Connect with your ride. Easy-to-install mounting adapters that fit a wide range of hub and spoke configurations.
Highlights:
- Easy-to-install various adapters for the Cannondale Wheel Sensor
- Compatible with Cannondale Wheel sensor
- Compatible with most hub and spoke combinations
$78.40
Trainer ready.
Keep the ride going by putting your Cannondale on a trainer with the 2-in-1 trainer axle.
Where it thrives:
The open road, on the trainer
What it's built for:
Versatility, convenience
Highlights:
- Fit your Cannondale road bike to any indoor trainer Removable end caps for outdoor riding
- Compatible with Cannondale road bikes that utilize Speed Release dropouts
$78.40
Trainer ready.
Keep the ride going by putting your Cannondale on a trainer with the 2-in-1 trainer axle.
Where it thrives:
The open road, on the trainer
What it's built for:
Versatility, convenience
Highlights:
- Fit your Cannondale road bike to any indoor trainer Removable end caps for outdoor riding
- Compatible with Cannondale road bikes that utilize Syntace X-12 dropouts
$91.00
Fully connected.
Connect with your ride. Integrated Cannondale wheel sensor, co-developed with Garmin, delivers hyper accurate speed, route and distance info, registers your bike, reminds you of needed service and more, all through the free Cannondale App.
Highlights:
- Captures essential ride data automatically
- Includes adapters for most wheel types
- Utilizes the Cannondale App for ultimate connectivity
$22.95
Designed for the non-drive side, the CR rear hub guard presses directly over existing hub hardware to protect your hub and spokes. Injection molded from super durable nylon material, this guard can handle some serious abuse while still being affordable.
- Material: Nylon
- Fits: Cinema FX & FX2 Freecoaster; VX2, VX3, and ZX Cassette Hubs and Wheels (2017 and later)
- Side: Non-Drive Side
- Weight: 1.3 oz
$22.95
Designed for drive-side use only, the DR rear hub guard presses directly over existing Cinema hub hardware to protect your chain, driver, and hub shell on grinds. Injection molded from super durable nylon material, this guard can handle some serious abuse while still being affordable and easily replaceable.
- Material: Nylon
- Fits: Cinema FX & FX2 Freecoaster; VX2, VX3, and ZX Cassette Hubs and Wheels (2017 and later)
- Side: Drive Side
- Weight: 1.1 oz
$22.95
The Cinema VF (uniVersal Front) hub guard is injection molded from an ultra-durable and fast sliding nylon composite. Designed to work with as many different front hub and fork combinations as possible, the VF guard covers either side of your hub and fork dropouts to protect them during grinds. Simply install outside the fork dropout, without replacing any hub hardware and without spacing out your forks.
- Material: Nylon
- Fits: Most Front Hubs
- Weight: 0.9 oz
$22.95
The Cinema VR (uniVersal Rear) hub guard is injection molded from an ultra-durable and fast sliding nylon composite. Designed to work with as many different rear hub and frame combinations as possible, the VR guard covers the drive side or non-drive side of your rear hub and protects it from grinds. Simply install outside the frame dropout without replacing any hub hardware and without needing to space out your frame.
- Material: Nylon
- Fits: Most Rear Hubs
- Weight: 1.2 oz
$52.99
9/15/20mm conversion kit for current generation front hubs
- Cobalt endcaps – These kits convert current generation Cobalt front wheels to 9/15mm thru-axle.
- Iodine/Opium endcaps - These kits convert current generation Iodine and Opium front wheels to 9/15/20mm thru-axle.
- Conversion: 9/15/20mm
- Cobalt weight: 26g (9mm) / 16g (15mm)
- Iodine/Opium weight: 28g (9mm) / 18g (15mm) / 23g (20mm)
$52.99
Converts cobalt/iodine/opium hubs from 142 to 135 qr spacing. Rear endcaps kit – this kit converts any crankbrothers 2, 3, or 11 wheelset from 142×12mm thruaxle rear spacing to 135×9mm qr rear spacing. Conversion: 135x9 mm Weight: 23g per pair
$12.99
Front axle conversion kits convert your hub to fit a new axle measurement or for a new group set.
- DT 350 20x110mm Left Dust Cap
$13.99
Front axle conversion kits convert your hub to fit a new axle measurement or for a new group set.
$21.59
Tubeless valves for DT Swiss rims for repair or replacement.
- DT Swiss Narrow Base Tubeless Valve - 53mm
$21.59
Tubeless valves for DT Swiss rims for repair or replacement.
- DT Swiss Narrow Base Tubeless Valve - 63mm
$21.59
Tubeless valves for DT Swiss rims for repair or replacement.
- DT Swiss Narrow Base Tubeless Valve - 73mm
$26.99
Aluminum Tubeless Presta Valve
- MTB or Road
- 18-25mm for Asymmetric Rims
$26.99
Aluminum Tubeless Presta Valve
- MTB or Road
- 18-25mm for Cylindrical Rims
$28.79 - $38.49
Developed for short spokes with a large deflection angle.
DT Pro Head nipples are designed for short spokes with a large angle of deflection, such as for e-bike use. Through the spherical contact surface, the nipple aligns automatically with the angle of the spoke, which leads to consistent power transmission. Note: brass nipples are not approved for children's products in the USA. See attached warning! All-brass nipples are recommended for e-bike use.
- Weight: starting at 59g for 64 nipples.
$30.19 - $78.19
The buyer's choice for wheel builders looking to save weight.
The nipples are available with or without DT Pro Lock, a patented liquid inside the nipple thread that makes the connection between the nipple and spoke extremely durable. It pairs perfectly with any wheel, though all-brass nipples are recommended for e-bike use.
- Weight: starting at 20g for 64 nipples
$39.99
Front axle conversion kits convert your hub to fit a new axle measurement or for a new group set.
$39.99
Rear axle conversion kits convert your hub to fit a new axle measurement or for a new group set. All DT Swiss hubs can be converted.
$41.99
Ease of use, lightweight, and optimum performance in a single product.
The DT Pro Head shape, combined with both a torx and a square tool interface, makes wheel building a lot easier. The spherical contact surface aligns the nipple perfectly with the spoke. All-brass nipples are recommended for e-bike use. Weight: starting at 26g for 64 nipples.
$50.99
DT Swiss tubeless ready tape seals the rim for tubeless applications and also works well as rim tape for tube-type set ups.
- Highly resistant adhesive tape works as a rim tape and airseal
$50.99
DT Swiss tubeless ready tape seals the rim for tubeless applications and also works well as rim tape for tube-type set ups.
- Highly resistant adhesive tape works as a rim tape and airseal
$50.99
DT Swiss tubeless ready tape seals the rim for tubeless applications and also works well as rim tape for tube-type set ups.
- Highly resistant adhesive tape works as a rim tape and airseal
$50.99
DT Swiss tubeless ready tape seals the rim for tubeless applications and also works well as rim tape for tube-type set ups.
- Highly resistant adhesive tape works as a rim tape and airseal
Page 1 of 8
Next page