Stan's Threaded Valve Extenders let you convert deep-section rims to tubeless. They're precision-machined from aluminum and are designed to fit deep-dish carbon and aluminum rims. And, they're threaded on the outside so you can install the Presta lock-ring nut for a perfect seal.
Stan's 3.30HD QR Hub Kit makes Stan's 3.30HD front hubs quick-release compatible. Installation is easy—just pull the old ones off and put the new ones on.
The weight, stiffness, and speed of carbon rims improve every ride. From fast climbs to nasty descents, SRAM's Roam 60 wheels crush trails with an incredible balance of low weight and high strength to excel on a wide variety of terrain. The 28mm wide carbon rims give big tires the support they deserve for improved cornering, yet are light enough for race day. Stomp on the pedals and feel the rapid engagement of the excellent star ratchet rear hub. Ditch the tubes with full UST tubeless compatibility, and reap the rewards of excellent traction, control, and fewer flats. And, the Roams are loaded with great features, like the Solo Spoke design that uses one spoke length for the entire wheel and quick release and 12mm through axle end caps that can be swapped without tools.
Shimano's Dura-Ace Track Hi-Flange Hubs build up into stiff, fast spinning wheels that want to sprint right out off the line. Stainless steel bearings and Borozon treated bearing races minimize drag for maximum efficiency and speed.
Shimano's Track Dura-Ace Hi-Flange Hubs build up into stiff, fast spinning wheels that want to sprint right out off the line. Stainless steel bearings and Borozon treated bearing races minimize drag for maximum efficiency and speed. You get your choice of single or double-sided cog threading.
The DT Swiss 240s MTB 6-Bolt Front Hub hits the sweet spot between low weight and reliability. With multiple axle options, you can build up a high-end wheel for nearly any bike. On the winning end of countless World Cups and local races in every discipline from XC to enduro to downhill, these hubs are the centerpiece for thousands of nearly frictionless rides.
$706.99 - $751.99
The DT Swiss 240s 6-Bolt Rear Hub hits the sweet spot between low weight and reliability. With multiple axle options, you can build up a high-end wheel for nearly any bike. DT's legendary Ratchet System ensures precise engagement and exceptional reliability, no matter how hard you stomp on the pedals. On the winning end of countless World Cups and local races in every discipline from XC to enduro to downhill, these hubs are the centerpiece for thousands of nearly frictionless rides.
DT Swiss' 350s Straightpull Center Lock hub hits the sweet spot between low weight and reliability. The straight pull spoke design makes for a stiff, responsive mountain bike wheel that will roll for thousands of nearly frictionless miles.
$375.99 - $422.99
DT's 350 MTB rear hub offers top-end performance for all your riding needs. DT Swiss' Ratchet freewheel system provides precise engagement, high load capacity, and reliability. The Ratchet System driver is extremely durable and can be easily serviced—without tools—in minutes thanks to it's press fit assembly. The press fit assembly also allows the hub to work with a wide array of axle configurations; by simply swapping out the tool-free end caps (sold separately), you'll be able to enjoy the legendary DT Swiss quality on almost any bike. • Accepts 6-bolt rotors
$23.99 - $35.00
SRAM's X0 conversion caps are the ticket for converting your X0 hubs to a different axle type.
Whether your joy comes from barreling downhill, or tearing up to the top, SRAM's MTH 746 rear hub will leave a smile on your face. An aluminum hubshell with machined flanges grant the hub a low weight without compromising durability. Plus, tough cartridge bearings roll smooth for the long haul.
$174.99 - $187.99
Convert your SRAM Roam 60, 50 or Rail 50 wheels to SRAM 11-speed with the XD Driver Body and Axle Cap. XD is a cassette driver body that allows the use of a 10-tooth small cog and provides an improved interface with the cassette. The axle cap is specific to the XD driver and your preferred axle choice.
$174.99 - $187.99
SRAM's Conversion Cap & 9/10-speed Driver Body is just what you need to convert your XD Driver equipped wheel to a standard cassette.
SRAM's Conversion Caps are just what you need to convert your Roam 60 or Rail 50 front wheel to fit your fork.
Wherever the trail leads, SRAM's Roam 40 is ready to go.The 25mm wide rims give big tires the support they deserve for outstanding cornering control, and the rims are durable enough for day-after-day sessions, yet light enough for race day. Ditch the tubes with full UST tubeless compatibility, and reap the rewards of excellent traction, control, and fewer flats. And, the Roams' great features continue with their Solo Spoke design that uses one spoke length to fit the entire wheel. This front wheel comes with a quick-release skewer and 15mm thru-axle end caps that can be interchanged without tools.
When unparalleled speed and pedaling efficiency is what you desire, SRAM's Rise 60 Rear Wheel rises to the occasion. This featherweight hoop with Carbon Tuned rims and butted stainless spokes blend just enough strength and stiffness with an impeccably low weight. There's no waiting for engagement, as the Double Time ratchet mechanism ensures the wheel moves as soon as your legs do. Once they start spinning, there's almost no stopping the incredibly smooth, durable Speedball Ceramic bearings.
$865.99 - $974.99
There are no compromises on race day, and Profile Design knew that when they designed their 58/TwentyFour tubular wheels. The 58mm-deep rim, 24.5mm rim width, and super stiff carbin layup provide uncompromising go-fast performance. And, the aero shape of the rim slips easily through the breeze, increasing your efficiency and speed. Match these rims up with your favorite tubular tires (sold separately) and experience a ride that clinchers just can't offer, with high-traction cornering and a supple road feel you need to ride to believe. The hubs feature sealed bearings for high-mileage durability and the freehub body is Shimano/SRAM 9, 10, and 11-speed compatible so you can use the drivetrain of your choice.
$599.99 - $839.99
Big tires and wide rims normally mean heavy wheels. But not with DT's BR 2250s! Nearly as light as standard wheels and with the footprint only fatties can offer, this wheelset turns any fat bike into a fun-machine!
Enjoy flat-land speed and rocket up mountains, too, with Zipp’s 202 Firecrest Carbon Disc Brake wheels. Not only do these light wheels set a high climbing standard, they also excel over rough roads and handle like champs in stiff crosswinds. The slippery profiles of Zipp's 32mm-deep, 25.4mm-wide dimpled rims are more aerodynamic than even many deep-section wheels. Zipp's 77D/177D disc hubs give you incredible stopping power in wet and dry conditions alike, and they're thru-axle compatible (sold separately) for jaw-dropping steering precision and power transfer. Plus, they're super smooth thanks to precision bearings. And, the finishing touch is Sapim's outstanding CX-Ray spokes.
Zipp makes the impossible possible with their 303 Firecrest Carbon Disc Brake wheels—they're equally at home on the flats as they are in the mountains. The 45mm-deep rims slice through the wind more efficiently than even many deep-section wheels thanks to their 28.5mm-wide dimpled rims. And, by creating a seamless junction between the rim and tire, the increased width further reduces drag. The 303s climb with the best and re-accelerate out of corners like rockets since they barely register on the scale, which makes them a must-have on undulating terrain. The extra wide rim also allows running wider tires at a lower pressure, which boosts ride quality and comfort and reduces rolling resistance. Zipp's 77D/177D disc hubs gives you incredible stopping power in wet and dry conditions alike, and they're thru-axle compatible (sold separately) for jaw-dropping steering precision and power transfer. You also get Sapim's outstanding CX-Ray spokes.
- Series: SLX - HB-M7000 - Axle Type: QR - Axle Length: 100 - Axle Diameter: 17.5 - HB-M7010 - Axle Type: 15mm E-Thru - Axle Length: 100 - Axle Diameter: 14 - Spoke Holes: 32H - Spoke Hole Circle: 44/44 - Average Weight: 189g
$1,934.99 - $2,425.00
Built on the foundation laid by Firecrest, offering unrivaled crosswind stability and the most aerodynamically efficient rim design on the market, the 303 NSW takes it all to the next level. Like its siblings, 404 NSW and 808 NSW, Zipp's top engineers in The Nest advanced development lab incorporated improved aerodynamics, industry leading braking performance, and reduced rolling friction to produce the lightest, highest-performance 303 wheelset Zipp has ever made. Light enough to fly up climbs, tough enough to excel in the cobbled classics, and with the industry's best available braking performance for the most technical descents, the 45mm deep 303 NSW is built for a singular purpose: To be fast, everywhere. But the 303 NSW is no "race day only" wheelset to be tucked away in a wheel bag until a race number is pinned to the rider's jersey. It's built to take the abuse of everyday training rides. Zipp has achieved this reliability at a lighter weight with a revised carbon fiber layup developed through testing on the famed cobbles of the Forest of Arenberg with the world's fastest riders. Because the toughest roads often experience the toughest weather conditions, they've included Zipp's Showstopper brake track for braking performance that delivers the best modulation and shortest stopping distances in wet and dry conditions. And they've improved aerodynamics with their ABLC Sawtooth technology and Impress graphics to produce a rim that is as fast as it is stealthy. At the center of the 303 NSW wheelset is the Cognition hubset. Built to provide the lowest rolling friction possible without compromising sealing, the hub's Swiss-made bearings work in tandem with Zipp's Axial Clutch technology to dramatically cut rolling friction when compared with conventional freehub systems. Bottom line: Cognition hubs make the 303 NSW fast, even when you aren't pedaling. All of these technologies combine to build a wheelset that only NSW technology can produce, a wheelset with unrivaled performance. Wherever the road may take you, get there faster on Zipp 303 NSW wheels.
Unleash an almighty sprint or solo off the front with Zipp’s 404s. They're built with 58mm-deep, 26.5mm-wide dimpled Firecrest rims and are some of the stiffest, most aerodynamic wheels available. 28 front and rear spokes are laced to Zipp’s stiff Track hubs with overisze axles, ensuring maximum lateral and torsional stiffness. Zipp’s Spoke Hole Impact Forming Technology boosts wheel strength so that you can lay down even more power in your pursuit of podium time.
$84.99 - $149.99
Shimano's Ultegra Hubs are flag-bearers for high-durability, smooth-rolling performance. Hardened steel cup-and-cone design use stainless steel bearings for minimal drag and superior ease of maintenance. Shimano's Digital Adjustment System makes hub maintenance fast, simple, and reduces axial force on the bearings, reducing wear and tear on the hub internals.
Build yourself a tough, no-nonsense rear wheel with Shimano's Deore Rear Hub. It features a quality cold-forged-aluminum shell, super durable angular contact bearings with high-polish bearing surfaces, and Shimano's excellent double contact sealing to seal out dirt and water. The freehub boasts quick engagement for lightning fast acceleration and confidence when negotiating tricky technical sections. A quick-release skewer makes wheel installation and removal a breeze.
The DT Swiss 240s road hub hits the sweet spot between light weight and reliability. On the winning end of countless Grand Tour stages and local races alike, these hubs will roll for thousands of nearly frictionless miles.
The DT Swiss 240s road hub hits the sweet spot between light weight and reliability. Lace it up and it'll roll for thousands of nearly frictionless miles. The legendary Ratchet System ensures precise engagement and exceptional dependability, no matter how hard you stomp on the pedals.
$706.99 - $751.99
The DT Swiss 240s MTB Center Lock Rear Hub hits the sweet spot between low weight and reliability. With multiple axle options and 6-bolt rotor adapters for the Center Lock spline, you can build up a high-end wheel for nearly any bike. On the winning end of countless World Cups and local races in every discipline from XC to enduro to downhill, these hubs are the centerpiece for thousands of nearly frictionless rides. Plus, DT's legendary Ratchet System ensures precise engagement and exceptional reliability, no matter how hard you stomp on the pedals.
9/15/20mm conversion kit for current generation front hubs - Cobalt endcaps – These kits convert current generation Cobalt front wheels to 9/15mm thru-axle. - Iodine/Opium endcaps - These kits convert current generation Iodine and Opium front wheels to 9/15/20mm thru-axle. - Conversion: 9/15/20mm - Cobalt weight: 26g (9mm) / 16g (15mm) - Iodine/Opium weight: 28g (9mm) / 18g (15mm) / 23g (20mm)
$1,474.99 - $1,740.00
Zipp optimized its Firecrest technology to build a highly aerodynamic 82mm rim—the Zipp 808 Firecrest Tubular. Designed for efficient power transfer and stable control in time trial and triathlon competition, the 808's wide 27.5mm rim shape provides confident tracking in crosswinds and over rough surfaces. Built with Zipp's excellent 77/177 hubset that features optimized flange geometry and Sapim CX-Sprint spokes to increase lateral stiffness, this 1,700-gram wheelset combines toughness and reliability in a wind-shedding package that has to be ridden to fully appreciate. Each wheel includes specially-designed Tangente Platinum Pro Evo brake pads, Zipp Integrated Valve Extender with valve-core wrench, rim tape, and quick release.