Brakes/Levers/Pads

PR1400 OXiC Disc Brake Pads - Brake pad inserts are made by Swiss Stop

PR1400 OXiC Disc Brake Pads - Brake pad inserts are made by Swiss Stop

- Resin brake cable quick-release - Adjustable angle R505T brake shoes - 28mm max tire size - Aluminum body with painted finish - Model Number: BR-R3000 - Series: SORA - Brake Type: New Super SLR Dual pivot - Reach: Short

Cost effective stopping power from the leader in cable-actuated disc brakes. - All calipers have 74mm mounting bolt spacing - For use with with long cable-pull levers - Mono-block caliper design has outboard pad adjustment - Spring tension is adjustable - Includes steel-backed organic pads - Brake Caliper Type: Post Mount - Brake Lever Actuation: Long Pull - Rotor Included: No - Weight: 215 g

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

The Kink Restrain brake lever is constructed from a fully forged aluminum lever, body, and bracket to maximize strength and stiffness. It features a low-profile, finger-friendly design as well as an ergonomically designed lever for added comfort. It's oversized hinge joints and pin increase strength and prevent cracks or breaks from over-tightening. The Restrain lever is also universal and can be used on the right or left side. Tech Specs - Material: 6061-T6 Aluminum - Bracket: Hinged - Lever: Medium ergonomic - Side: Right or left hand compatible - Weight: 2.5oz

Clean up your handlebar with Avid's MatchMaker X clamp. It combines mounts for your SRAM shifters and Avid brake levers into one simple, sleek unit so you can shed grams and keep your bars nice and tidy. You can also integrate RockShox's XLoc remote (sold separately) for maximum convenience and ease of use.

Bolt on SRAM's Apex Pad & Holder for excellent braking. The holder design makes it easy to switch pads—meaning this system is great for road and cyclocross bikes alike!

- Pair of K-Type disc brake pads without fins, for one caliper - Choice of compound: Resin, for improved modulation & lower noise, or Metallic, for improved durability & higher braking power in muddy conditions - Steel backplate for lower cost or Ti backplate for improved heat management and lower weight - Fits all Shimano flat mount gravel & road disc calipers, including Dura Ace BR-R9170, Ultegra BR-R8070, 105 BR-R7070, GRX BR-RX810 and BR-RX400 - Also compatible with XTR BR-M9100 calipers - Interchangeable with L-type finned pads (except for XTR BR-M9100)

These Kool-Stop disc brake pads are designed for use with Magura disc brakes. - The Kool-Stop semi-metallic compound is made with organic materials and small amounts of metal bound together to provide high performance braking throughout the life of the pad - Fits Magura Next MT-5 and MT-7 4-piston disc brakes

- Pair of J-Type disc brake pads with fins, for 1 caliper - Available with resin or metallic compound - Fits 2-piston SLX and XT calipers from 10 to 12 speed groups and 10 or 11 speed XTR brakes - Ice Technologies fins & aluminum backplate cools down the brakes in use, which improves braking consistency and power and reduces brake fade during long, technical dowhnill stretches - Longer lasting than G-type pads - Interchangeable with F-Type and G-Type pads - Includes spring and pin

- Pair of L-Type brake pads with fins, for one caliper Ice Technologies fins & aluminum backplate cools down the brakes in use, which improves braking consistency and power and reduces brake fade, especially in long descents - Choice of compound: Resin, for improved modulation & lower noise, or Metallic, for improved durability & higher braking power in muddy conditions - Longer lasting than K-Type pads - Interchangeable with K-type finless pads - Fits all Shimano flat mount gravel & road disc calipers, including Dura Ace BR-R9170, Ultegra BR-R8070, 105 BR-R7070, GRX BR-RX810 and BR-RX400 - NOT compatible with XTR BR-M9100

- Set of (6) precision machined Torx T25 titanium disc rotor bolts

Clean up your control center with Avid's Matchmaker clamp. It combines the mounts for your SRAM shifters and Avid brake levers into one simple, sleek unit so you can drop some grams and keep your bar nice and tidy.

Profile Design's carbon-specific brake pads are specially formulated to improve braking performance when you're using carbon rims. Profile Design's TwentyFour Series wheels require the use of these P220 carbon-specific brake pads.

Shimano BR-M375 Mechanical Disc Brake Caliper - Pad adjust tool size unified to 5mm allen key - Quick/fast assembly - Light braking operation for easy/long riding - Clean cable routing in combination with both chain stay and seat stay mount - Brake power same as BR-M416A - 20% pad clearance increase - Cable actuated - Single 74mm caliper - For use with Linear-pull MTB levers - B01S Resin Pads - Rotor not included - Frame or fork mount adapter and rotor not included - Brake Caliper Type: Post Mount - Brake Lever Actuation: Long Pull

- Intuitive and powerful braking - Quicker brake engagement with shorter free stroke - Rider tunable and action-optimized cockpit - High-performance brake control - Additional contact point for a stiffer brake lever - 10 deg. rotation angle setting range for I-SPEC EV shifting lever

- V-Brake design - Cartridge type brake pads - Inner cable lead unit included - Adjustable linear springs on both sides - Longer brake arm resulting in a better spacing for mudguards

Characteristics: - smooth feel in the brake lever - predictable and progressive brake power - very high durability - consistently quiet operation Fits: Shimano - XTR BR-M9000,BR-M9020,BR-M987,BR-M988,BR-M985 - XT BR-M8000,BR-M785 - SLX BR-M7000,BR-M675,BR-M666 - DEORE BR-M6000,BR-M615 - ALFINE BR-S700 - BR-RS785 - BR-R785 - BR-CX75 - BR-R515 - BR-R315 FSA - K-Force DB-TX-9000 - Afterburner DB-TX-9150 REVER - MCX1 Post Mount

- Organic Compound features smooth modulation - 1.6mm thick backplate saves weight and offers additonal space for pad, providing longer pad life - Balanced performance offers the best combination in durability, now noise and all-condition performance

Characteristics: - smooth feel in the brake lever - predictable and progressive brake power - very high durability - consistently quiet operation Fits: Shimano - Dura Ace BR-R9170 - Ultegra BR-R8070 - XTR BR-M9100 - BR-RS805 - BR-RS505 - BR-RS405 - BR-RS305 Tektro - HD-R310 REVER - MCX1 Flat Mount

The SwissStop Disc RS brake pad set offers a highly balanced combination of brake performance, durability and incredibly low noise in all conditions. - Delivers a smooth feel in the brake lever with predictable and progressive brake power - Provides extremely quiet operation in all environments - Features an organic compound that offers smooth modulation and is rotor-friendly - At 1.6mm thick the steel backplate saves weight over standard designs, yet provides the preferred thermal characteristics, strength and stability of steel - Compatible with SRAM Code R (2018+), RSC (2018+), Guide RE; Avid Code (2011-2014), Code R - Pad Shape Number: 36 - Designed for ebike: Yes - Backing Plate Material: Steel - Compound: Organic

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

- High quality, durable stainless steel machined braking surface ensures consistent stopping power and resists corrosion - Reinforced rotor design improves stability and resists warping - Compatible with all sintered, semi-metallic, and organic/resin disc brake pad compounds

SRAM road disc brake pads are designed for use with SRAM road hydraulic disc brakes (HRD). - For use with Level Ultimate & Level TLM Brakes - Pad Material: Organic - Type: Road/CX - Includes guide pin, clip, & pad spreader

SRAM's Apex Brake Caliper is forged from aluminum for low weight and high strength. SRAM's powerful dual-pivot design offers excellent stopping power and great modulation. You'll appreciate the easy-to-replace cartridge brake pads, and the handy quick release and adjustment barrel too.

Characteristics: High performance compound for alloy wheels. Improved power and modulation with excellent wet weather stopping power. Design: - low profile shape - each Flash EVO pad is 0.75mm narrower then a FlashPro pad for a total of 1.5mm more clearance for wide rims - 4 asymmetric cut outs - direct mount caliper compatible Fits: - SRAM Road - Shimano Road - CAMPA Potenza 2016 - CAMPA Athena 2016 - CAMPA Veloce 2016

High performance compound for alloy wheels. Improved power and modulation with excellent wet weather stopping power. Fits: - SRAM Road - Shimano Road - Campagnolo Potenza 2016 - Campagnolo Athena 2016 - Campagnolo Veloce 2016 - Campagnolo Centaur 2017

Shimano G04Ti Metal Disc Brake Pads deliver superlight, long-lasting braking power. - Fits XTR BR-M9000, BR-M9020, BR-M985, XT BR-M8000, BR-M785, SLX BR-M666, Alfine BR-S700 and BR-R785, BR-RS785 road disc calipers - Sintered Metal pad with consistent, high stopping power in wet or dry conditions and excellent durability - Titanium backing plate for light weight and improved heat insulation

Bolt on Avid's Shorty Brake Pads for excellent braking no matter the conditions. The easy-to-use cartridge design makes swapping pads a breeze.

SRAM's Disc Brake Pads are reliable and rugged. These pads are compatible with Avid Trail and SRAM Guide and G2 disc brakes.

The Dura 2 Road Holder is a lightweight forged aluminum holder with dual pivot adjustment that houses Kool-Stop's Dual Compound Dura2 Type insert. These holders will fit most Shimano type brake systems. Features: - Aluminum Holder - Water Grooves - Dual Pivot Adjustment - Dual Compound - Ultra lightweight 30g/pair

- Pair of D-Type disc brake pads without fins, for 1 caliper - Available with Resin or Metallic brake compound - Fits most 4-piston Shimano brakes, including XTR BR-M9120, XT BR-M8120, XT-BR-M8020, SLX BR-M7120, Saint BR-M820 and BR-M810, Zee BR-M640 and non-series BR-MT520 and BR-MT420 calipers - Can be used as a lower cost alternative to H-Type or N-Type pads - Includes spring and pin

Original equipment pads for no-compromise disc brake performance. - Pad Shape Number: 37

- Shimano G-Type disc brake pads, without fins, for one caliper - Titanium backplate for improved heat dissipation & lighter weight - Metallic compound for increased power & durability - Compatible with 2-piston XTR brakes from 10 and 11 speed groups as well as 10 to 12 speed XT and SLX - Includes spring and pin

- Top mount levers for use with caliper or cantilever brakes - Forged aluminum - Hinge clamp style - Return spring and reach adjustment - Black - 90g / pair

Ideal pad for everyday use. Compound works well on all aluminum rims and well suited for softer alloys, including magnesium. Fits: - SRAM Road - Shimano Road - Campagnolo Potenza 2016 - Campagnolo Athena 2016 - Campagnolo Veloce 2016 - Campagnolo Centaur 2017

Avid's Front 170mm Post Bracket Hardware Kit has everything you need to mount a 170mm rotor (sold separately) to the front of your bike. Kits include mounting bolts and post mount spacers for front brake installation.

Avid, Post Bracket, Includes Stainless Caliper Mounting Bolts (CPS and Standard)

Avid's Rear 170mm Post Bracket Hardware Kit has everything you need to mount a 170mm rotor (sold separately) to the back of your bike. Kits include mounting bolts and a 30mm post mount spacer for rear brake installation.

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

- Aluminum pad holder with R55C4 pads

- Shimano, SM-RT56 Rotor, 180mm or 160mm, ISO, for resin pads only - Stainless steel rotor

High performance Kevlar, Ceramic, Brass and resin composite material. Provides excellent brake power with minimal effort at the brake lever. Performance is consistent in both wet and dry conditions and pad life is excellent. High quality springs included with every set (where applicable). Fits: Formula - RO Racing - T1 Racing - R1 Racing - R1 - C1 - CR3 - T1 - RO - Mega - The One - RX - RR1 - CURA

- High performance compound recommended for all-conditions - Alloy backing plate: 50% lighter than steel backing plate

Kool-Stop disc brake pads designed for use with Avid/SRAM disc brakes. - Compatible with SRAM Guide RE and Avid Code R 2010-Current - Designed to give your bike performance braking in extreme conditions, e.g. XC, downhill, trials and dual slalom riding - Sintered brake compound with brass back plate

Kool-Stop disc brake pads designed for use with Avid/SRAM disc brakes. - Features a copper plated backing plate and sintered front for extreme conditions like down hill - Compatible with RED, Force 22 Hydraulic, Level, Rival, and Level TLM

With copper plated backing plate and sintered front these Kool-Stop metal disc brake pads are designed to give your bike performance braking in extreme conditions, e.g. XC, downhill, trials and dual slalom riding. Kool-Stop pads have a quick break-in period so you get maximum performance during those demanding rides when stopping power, durability and long pad life are required.

With copper plated back plate, Kool-Stop sintered metal disc brake pads are designed to give your bike performance braking in extreme conditions, e.g. XC, downhill, trials and dual slalom riding. Our pads have a quick break-in period so you get maximum performance during those demanding rides when stopping power, durability and long pad life are required.

With a copper plated back plate, Kool-Stop sintered metal disc brake pads are designed to give your bike performance braking in extreme conditions, e.g. XC, downhill, trials and dual slalom riding. The pads have a quick break-in period so you get maximum performance during those demanding rides when stopping power, durability and long pad life are required.

High performance Kevlar, Ceramic, Brass and resin composite material. Provides excellent brake power with minimal effort at the brake lever. Performance is consistent in both wet and dry conditions and pad life is excellent. High quality springs included with every set (where applicable). Fits: Avid - Juicy 3,5,7,Carbon,Ultimate - BB7 Mechanical

High performance Kevlar, Ceramic, Brass and resin composite material. Provides excellent brake power with minimal effort at the brake lever. Performance is consistent in both wet and dry conditions and pad life is excellent. High quality springs included with every set (where applicable). Fits: Avid - XO Trail - Elixir 9 Trail - Elixir 7 Trail SRAM - Guide Ultimate,RSC,RS,R,T

Made from industry-standard diecast aluminum, featuring extra-wide brake arm bends for large tire clearance and low-profile spring adjustment caps for universal functionality. Includes a simple one-piece straddle cable hanger system, brake pads, and all necessary hardware. The updated V2 design gives additional clearance, and the flat brake arm profiles eliminate any chance of brake arm rub. Product Specifications - Type: 990 U-Brake - Material: Die-Cast Aluminum - Includes: Brakes, Bolts, Pads, Straddle Cable - Weight: 5.9oz

- Pair of G-Type disc brake pads without fins, for 1 caliper - Resin or Metallic brake compound - Available with Steel backplate for lower cost or Aluminum backplate for superior heat management - Fits 2-piston SLX and XT calipers from 10 to 12 speed groups and 10 or 11 speed XTR brakes - Interchangeable with F-Type and J-Type pads - Includes spring and pin

• 107mm arch for better clearance with mud guard • Updated rubber boots secure attachment to lead pipe • Strong braking power with excellent braking control • Cartridge shoe holder • Color options: Black, Silver

- 107mm arch gives a better mud guard clearance - Updated rubber boots - Strong braking power with excellent braking control

Jagwire's Road Pro Brake Pads fit Campagnolo, Shimano and SRAM sidepull brakes. They feature Jagwire's tried-and-true Pro Series compound for excellent braking and durability. The pads are cartridge-style for easy pad replacement without losing your brake shoe position. And there are wheel guides on the shoes to help when you're putting a wheel back on.

The squeeze of our levers is what dreams are made of (and you know which dreams we're talking about). Most of our levers can be swapped to be run either front or rear, which is convenient if you like to your brakes reversed and a Godsend if you bust a lever in the middle of the woods. Avid levers are easy to install, simple to set up, and a pleasure to pull. - Reach Adjustment - Qwik-Adjust Barrel Adjuster - Compatible with mechanical disc brakes and linear-pull brakes

Characteristics: - long lasting, high endurance pad compound - very easy modulation of braking force - high temperature stability for consistent brake power - organic formula is low noise and rotor friendly Fits: Avid: - XO Trail - Elixir 9 Trail - Elixir 7 Trail SRAM: - Guide Ultimate,RSC,RS,R,T

Characteristics: - long lasting, high endurance pad compound - very easy modulation of braking force - high temperature stability for consistent brake power - organic formula is low noise and rotor friendly Fits: SRAM: - HRD - eTap HRD - Level Ultimate,TLM