Train In Comfort Use this nifty device to keep your ride comfortable. When placed under your front wheel, this block raises the front of the bike by approximately 2.75” (70mm) to give you a more level and stable platform for your workout.
Kurt Kinetic's Z Rollers are the perfect option for developing better balance, technique, and fitness. It's also great for pre-race warm-ups. Precision machined aluminum rollers and premium bearings provide a smooth, quiet ride. Plus, the lightweight aluminum frame folds down for easy transport and storage. • 3.5 x 14.7-inch aluminum rollers • Tri-fold design folds down to 21 x 20 x 8.8-inches • Adjustable to fit bikes with a wheelbase from 38.2-43.3-inches • Ready to ride out of the box
The iconic FLUX Smart has been upgraded to the FLUX 2 Smart. Compared to its predecessor, it is equipped with a bigger and stronger resistance unit and a heavier flywheel. This resulted in a wider simulation range, better ride feel and a more accurate power measurement. - 16.8 lb flywheel makes for a more realistic training experience - Maximum resistance of 2000 watt - Incline simulation up to 16% - Power measurement accuracy of 2.5% - Compatible with long-cage derailleurs - Axle compatibility: 130mm, 135mm, 142x12mm and 148x12mm - Compatible with Bluetooth and ANT + FE-C FEATURES - Type of trainer: Interactive Smart direct drive with electric brake - Magnets: 8 Permanent ferrite magnets & 8 electromagnets - Transmission: None - Electrical requirements: 110-240 Volt - Power indicator: None - Connection indicator (ANT/BT): 2 LEDs - Firmware upgradable: Yes - Suitable cassettes: Shimano & SRAM: 8 t/m 11 speed. Campagnolo body sold separately - Suitable axles: Width of rear fork: Race 130mm, MTB 135mm, 142mm & 148mm. Adapter for 135x10mm available. - Suitable bikes: Race, Tri & MTB - Supplied with: Quick release for road bikes and mountain bikes (5mm), Direct drive quick release with adapter set 142x12mm, 1 month Tacx Premium software SPECIFICATIONS - Max. power (40 km/h): 2000 Watt - Max. slope: 16% - Simulation of descent: No - Max. torque: 41Nm - Max. brake force: 120N - Flywheel: Actual of 7.6kg - Mass inertia: 31.2kg - Calibration: Spin down - Footprint (lxw): 670x642mm (26.4x25.3in) - Height: 460mm (18.1in) - Dimensions when folded: Not foldable - Weight: 23.6kg (52lbs) - Article number: T2980 DATA OUTPUT AND CONTROL - Wireless communication: ANT+ FE-C, Bluetooth Smart open - Control by: Smartphone, tablet, ANT+ FE-C bike computers and stand-alone. Connect to computer via ANT+ antenna - Output: Speed, cadence and power - Read out on: Smartphone, tablet, bike computer, sports watch, computer with ANT+ antenna - Accuracy: <2.5%
For the professional or advanced rider or even for studio use, the Minoura LiveRoll R800 is the world's best roller. - A heavy and wide roller with steel covers attached. Can be used for smoother and higher-speed rotation practice over other smaller diameter rollers. - Matched wheelbase adjustability with continuous adjustment on frame. - Uses a high-rigidity and lightweight aluminum frame with front drop roller that adjusts the middle roller to provide a safe spin even at high RPM's. - Feet and footrest are height-adjustable at six points. - 22" wide x 6" high x 52" long
Whether you want to attend a group ride in Zwift, climb the Dolomites in Rouvy or simply need a sweat session, the M2 smart trainer can get you there. All you need is your bike, the M2, your favorite virtual training software, and device of choice. This do-it-all, smart bike trainer is capable of replicating any workout thrown its way, up to 1500 watts and a 15% climbing grade. Simply connect to your virtual training application of choice via integrated dual-band ANT+ FE-C and Bluetooth, and let the M2’s electromagnetic response system do the rest. And thanks to integrated speed, cadence and power data, you can track and record performance data without extra external sensors. Plus, our innovative clutch knob ensures perfect tire-to roller connection for every single ride. - Noise level is a quiet 69 decibels at 20 mph. - PowerTuned using PowerTap technology for accurate power readings up to +/- 5%. - This trainer is designed to fit common road and mountain bike frames with included steel quick release skewer and has three settings for rear dropout spacing: 120mm, 130mm and 135mm. Optional thru-axle adapter available for 142x12mm and 148x12mm. - Integrated dual ANT+ FE-C and Bluetooth standards. - Fast response electromagnetic resistance ensures most responsive resistance and maximum power available. - Robust design is capable of handling up to 1500 watts at 20 mph and can simulate up to a 15% climbing grade. - Headless mode (powered on, not paired to any apps) lets you ride with a progressive resistance curve that matches the Fluid2. - Internally integrated speed, cadence and power data eliminates the need for extra external sensors. - LED indicator lights communicate connectivity and more. - Internal cooling system moves air through the trainer to keep it cool while active thermal sensors ensure accurate performance data even during the hardest of workouts. - Comes on the CycleOps foldable Classic frame with spring loaded, bolt-action lever. - Features clutch knob for perfect roller to tire tension each ride. - 2" resistance unit roller allows for 650b, 700c, 26", 27", and 29" - up to a 2.0 tire. - Does not fit 650c wheel sizes, nor all 29er tires. - Precision-machined alloy roller reduces tire wear and slippage. - Eccentric leveling feet allow for easy adjustment on uneven surfaces. - Trainer tire recommended. - Compatible with a wide variety of devices and virtual training applications, including Rouvy, Zwift, TrainerRoad and many more. Contact us with questions about compatibility with other software. - Over the air (OTA) firmware updates via Bluetooth devices ensures the M2 is up to date. - Some assembly required. - All of our trainers are tested to the combined weight (rider and bike) of 300 lbs. - ANT+ and BlueGiga USB dongles sold separately. - Not compatible with CycleOps 20/24" wheel adapter. - Optional thru-axle adapter available for 142x12mm and 148x12mm bikes.
The Kinetic Magnetic trainer is the perfect choice for bicycles with lower gearing, like cyclocross bikes, fixies, singlespeeds, mountain bikes and even BMX bikes. Its super-smooth magnetic resistance unit features a heavy 6.25-pound flywheel simulating outdoor riding, so that you experience the same feeling and workout you get outside. And, with its handlebar-mounted thumb lever, you can choose from nine levels of resistance for everything from easy spins to hard efforts to full-on intervals and sprints. Other great features include the super-stable oversize steel frame that folds for easy portability and storage; a secure, easy-to-use quick-release bike mount so you can go from trainer to outdoors in a blink; a 2 1/8-inch-wide roller that minimizes tire wear; and the ability to use bikes with both quick-release and bolt-on rear wheels.
$1,614.99 $1,899.99 15% Savings
The NEO Smart offers the best in power and intelligence and is the quietest indoor trainer currently available on the market. The lack of any physical transmissions means this is the first true direct drive. Road feel is simulated in a highly realistic manner, there is no loss of power. The powerful motor is able to apply resistance up to 2200 Watt and simulate slopes realistically up to 25%. It also speeds up during descents. This ensures the most realistic cycling experience, also during climbs. The lack of any physical transmission, and in turn any parts that could rattle or rub against each other, ensures this trainer is extremely quiet. In addition, this trainer requires no calibration and suffers no wear and tear. Just like other Smart trainers, the NEO communicates using ANT+ and Bluetooth Smart, allowing it to be connected quickly and easily with Tacx apps. Performance data can be viewed on several devices simultaneously, including your smartphone, bike computer and sports watch. When the NEO Smart isn’t connected to a smartphone, tablet or computer, it behaves as a fluid trainer. This means the trainer behaves progressively: when your speed increases, the resistance increases as well. So it is possible to use this trainer in a “stand-alone” status. Furthermore, the Tacx NEO features Plug in/Plug out technology and can therefore be used with and without a plug. When the plug is not in use, the trainer will act as a wireless motor brake. This means the trainer will be not be able to speed up during descents. So you can use this trainer anytime and anywhere, even when you don’t have your smartphone with you. -Software Tacx apps & Third party apps. PC software via upgrade. -Operation Automatic -Resistance unit Direct drive -Realistic slope 25% 1 -Descent simulation To -5% -Max brake power (10 sec.) 2200 Watt -Mass inertia 125 kg 2
Turn your basement into a hellish winter sweat cavern as you dream of summer climbs and fitting back into your spandex. With a little help from the Kurt Kinetic Road Machine | Smart Trainer, you'll be creating puddles beneath your stallion and engaging in endless suffering of your own free will. With on-board power training, the Road Machine Smart App links up with Siri (or the faceless automaton Android AI) to make sure you ain't kidding yourself with those intervals you're "throwing down." When you're screaming, "There's no more?!" at your television after binge-riding through all four seasons of Battlestar Galactica, the Road Machine | Smart Trainer will even hold your interest with tailored workouts. So, let's not hear anymore of that "It's too cold to ride" business. The Road Machine | Smart Trainer will have none of it! - Stable, durable trainer frame - Unconditional lifetime warrantly - Frame fits 22-inch to 29-inch wheels - Large diameter roller - Pairs with devices using Bluetooth Smart - Ergonomic rubberized knobs and feet - Progressive fluid resistance - Fully assembled - Folds flat for easy storage
Trainer thru axle adapter for CycleOps Trainers. Fits most 142mm thru axles with 1.0 and 1.75 thread pitch. This kit consists of an axle, washers, and end caps with bolts for use with CycleOps Classic or Pro Series trainers. The axle is threaded on both sides to fit Syntace and Maxle/ABP style thru axle systems. PowerSync Trainers are not currently 29er compatible. Partial list of compatible bike frames: - Canyon - Trek - Specialized - Cannondale - Niner - Salsa - Giant Reign - Scott - Santa Cruz - Norco
Kurt Kinetic's Skewer is an affordable, steel quick-release that perfectly fits into all Kurt Kinetic trainers. Use it instead of your nice aluminum quick release so it stays in pristine condition. • 130mm width
CycleOps' Climbing Riser Block offers 3 levels of elevation to lift your front wheel and provide a workout simulating climbing hills. For steeper climbing workouts, 2 climbing blocks (sold separately) may be placed on top of each other for many different adjustment levels.
The Blue Matic has been a Tacx offering for many years and is a very popular trainer. During your training session you can use the handlebar resistance lever to adjust the resistance as needed. The Tacx Blue Matic Smart is bundled with an ANT+/BT speed & cadence sensor to allow connection with tablets or smartphones, and allows use of interactive software and applications. Train with the Tacx Training app, Tacx Cycling app, Zwift, or TrainerRoad! - Stable and robust footprint - The bike is fixed in the trainer easily by two simple clicks - Handlebar resistance lever with 10 positions - Brake system with 2 X 8 permanent magnets - 2.5lbs flywheel - Maximum resistance 700 watt - Easy to assemble brake system FEATURES - Type of trainer: Basic trainer with magnetic brake - Magnets: 2x8 Permanent ferrite magnets - Transmission: Roller, 30 mm - Electrical requirements: No mains voltage required - Power indicator: None - Connection indicator (ANT/BT): None - Firmware upgradable: No - Suitable bikes: Race, Tri & MTB, if necessary with axle skewer, 29? wheel with Tacx trainer tire - Supplied with: Quick release for road bikes and mountain bikes (5mm) SPECIFICATIONS - Max. power (40 km/h): 700 Watt - Max. slope: n.a. - Simulation of descent: No - Max. torque: 12.2Nm - Max. brake force: 36N - Flywheel: Actual of 1.25kg - Mass inertia: 8 kg (17.6 lbs) - Calibration: n.a. - Footprint (lxw): 640×635mm (25.2×25.0in) - Height: 440mm (17.3in) - Dimensions when folded: 610×420×250mm (24.0×16.5×9.84in) - Weight: 8.40kg (18.5lbs) - Article number: T2650.VP DATA OUTPUT AND CONTROL - Wireless communication: None - Control by: Handlebar resistance lever with 10 positions - Output: n.a. - Read out on: n.a. - Accuracy: n.a.
A KILLER TRAINING COMBO What happens when you pair a speed sensor with the #1 selling bike trainer in the USA? You get a combo that’s ready for any virtual—or non-virtual—training ride. It’s the ideal setup for budget-conscious athletes looking to join fun, virtual communities, like Rouvy and Zwift, without a traditional smart trainer. Simply install the magnetless speed sensor on the rear wheel of your bike, mount your bike to the solid Fluid2 trainer with our innovative club knob, connect to your virtual training app of choice via Bluetooth or ANT+ and voilà! - you’re ready to sweat. - Fluid resistance unit provides a quiet and consistent ride. - Progressive resistance offers the widest resistance range and road-like feel. - Best-selling bike trainer in the USA. - Included speed sensor connects you with Rouvy, Zwift, and other virtual training apps. - ANT+ USB and BlueGiga USB sold separately. In the box: - Fluid2 Smart Equipped Bike Trainer - PowerTap dual-band magnetless speed sensor - Front wheel leveling block - PowerTuned for optimal road-like feel. - Noise level at 20 mph is super quiet 64-68 decibels. - Large, individually precision-balanced flywheel allows for improved road-like feel. - Self-cooling mechanisms including a patented fan design keeps the unit performing better, longer. - Eccentric leveling feet allow for easy adjustment on uneven surfaces. - Comes on the CycleOps foldable Classic frame with spring loaded, bolt-action lever. - Precision-machined alloy roller reduces tire wear and slippage. - Features clutch knob for perfect roller-to-tire tension each ride. - 2" resistance unit roller allows for 650b, 700c, 26", 27" and 29" wheel sizes—up to a 2.0 tire. - This trainer is designed to fit common road and mountain bike frames with included steel quick release skewer and has three settings for rear dropout spacing: 120mm, 130mm, and 135mm. - Trainer tire recommended. - Compatible with virtual training apps. - All of our trainers are tested to the combined weight (rider and bike) of 300 lbs. - Optional thru-axle adapter available for 142x12mm and 148x12mm bikes.
Kinetic's Trainer Mat is a simple necessity for any cyclist who cherishes a clean training environment. It keeps floors clean and sweat-free and reduces vibration. Durable closed-cell PVC foam means it will stand up to even the most intense training sessions.
Kinetic's Riser Ring lets you level your bike when you're riding on your trainer. Plus, there are 3 other steps that let you simulate climbing by elevating the front wheel. The Riser Ring is simple to use and stable for excellent support. • Designed for the following Kinetic trainers: the Road Machine, Magnetic, and Cyclone
Find fitness with CycleOps' Fluid2 Trainer Kit. The Fluid2 utilizes Power Band technology to generate distinct fluid resistance changes seamlessly without the use of a lever. The large flywheel delivers a smooth, realistic road feel while sturdy legs provide a stable platform for pumping out hard, 600-watt efforts and out-of-the-saddle climbs. A favorite among serious racers, the Fluid2 is easily transportable and stands up to repeated punishment by the burliest of legs for years of impressive performance. Two climbing blocks are stackable to simulate steep grades, a RealRides training DVD will keep you motivated, and the Trainer Mat and Bike Thong sweat guard protect your equipment and floor.
CycleOps' Trainer Skewer ensures your trainer will hold your rear wheel in place. Made of heavy-duty stainless steel, it will provide years of reliable use and keeps your high-end skewers pristine.
No matter your training category, the H2 is the perfect addition to any athlete’s toolbox. From weekend warriors to pro-podium chasers, mountain bikers to triathletes, this smart direct drive trainer is versatile enough to push any training regimen to the edge. The heart of the H2 is its ability to replicate real world inertia better than anyone else thanks to it its massive, 20-pound precision-balanced flywheel. The H2’s soul is its impressive electrical prowess, complete with integrated cadence, speed and power data, internal cooling, over-the-air firmware updates, dual-band ANT+ and Bluetooth compatibility and topped off with its electromagnetic resistance system for rapid resistance changes within virtual training environments. Plus, at 64 decibels the H2 is library-level quiet - even if your next virtual victory may not be. - Noise level at 20 mph is 64 decibels, quiet enough to ride in a library. - PowerTuned using PowerTap technology for up to +/- 2% accurate power readings. - Thru-axle compatible for bike frames with fork widths of 142 or 148. - Quick-release compatible for bike frames with fork widths of 130mm and 135 mm. - Integrated dual ANT+ FE-C and Bluetooth standards. - Compatible with a wide variety of devices and virtual training application, including Rouvy, Zwift, TrainerRoad and many more. - - - - - Contact us with questions about compatibility with other software. - 20 lb precision balanced flywheel provides quiet, vibration free and true-to-the-road riding experience. - Fast response electromagnetic resistance ensures most responsive resistance and maximum power available. - Robust design is capable of handling up to 2000 watts at 20 mph and can simulate up to a 20% climbing grade. - Headless mode (powered on, not paired to any apps) lets you ride with a progressive resistance curve that matches the Fluid2. - Internally integrated speed, cadence and power data eliminates the need for extra external sensors. - LED indicator lights communicate connectivity and more. - Direct drive design directly connects the bicycle to the resistance unit, eliminating tire wear. - Integrated front wheel tray adds stability to ride without taking up any extra storage space. - Internal cooling technology ensures accurate ride data even during the hardest of workouts. - Built-in front wheel tray adds stability to ride and nests within the trainer when not in use. - Folding legs provide widest footprint of direct drive indoor bicycle trainers on the market for added stability and easy storage. - Includes a Shimano splined freehub for compatibility with Shimano 8-11 speed cassettes. XD freehubs are also available and sold separately. - Accessible and balanced handle allows for smooth, anyone-can-carry transit of the trainer. - Over the air (OTA) firmware updates via Bluetooth ensures the H2 is up to date with all the latest features. - All of our trainers are tested to the combined weight (rider and bike) of 300 lbs. - Dimensions when Open L*H*W: 31” x 18.5” x 19.5” (787.4 x 469.9 x 495.3 mm). - Dimensions when Closed L*H*W: 8.5” x 18.5” x 19.5” (76.2 x 469.9 x 495.3 mm). - Weighs in at 47 lb. (21.3 kg). - ANT+ and BlueGiga USB dongles sold separately. - Cassette not included. - Zwift certified.
Feel the smooth precision of the lathe-turned-aluminum drums on CycleOps’ Aluminum Rollers. The durable steel frame stands up to years of hard training, indoors or out. Plus, the folding design allows convenient storage and transport. The rollers feature an adjustable belt for right and left dismounting, an easily adjusted wheelbase and a limited lifetime warranty.
Previous page Page 2 of 2