Your Search: "trainer"

The Tacx trainer tires have been developed specifically for riding indoors on bike trainers. The special rubber minimizes the risk of overheating, slipping, and wear and tear. They are also quieter than regular rear tires on both road and mountain bikes. Tacx trainer tires are not suitable for outside riding.

The Tacx trainer tires have been developed specifically for riding indoors on bike trainers. The special rubber minimizes the risk of overheating, slipping, and wear and tear. They are also quieter than regular rear tires on both road and mountain bikes. Tacx trainer tires are not suitable for outside riding.

- Replacement rear wheel skewer. - Specifically designed for use with Saris trainers. - Can be used for both indoor and outdoor rides.

Universal quick release skewer for placing your bike in the trainer or direct drive. This axle replaces the standard quick release, allowing racing bikes and mountain bikes to be used with Tacx trainers.

The Finish Line Absorb-It Mat is the perfect way to keep any work area clean. Designed with special absorption fiber technology, the Absorb-It Mat absorbs and traps chain lubricants, cleaners, degreasers, brake fluid and hydraulic oils. The combination of absorption fibers and a leak-proof poly liner make the Absorb-It Mat perfect accessory when degreasing & lubricating bicycle chains. Use the Absorb-It on a work bench, under an automobile to catch leaking fluids, in a car trunk to prevent stains, in a chemical storage cabinets, or under a trainer to catch perspiration. The Absorb-It Mat comes in two different sizes: Small (48" X 18") and Large (60" X 36"). The 48" x 18" will absorb and trap up to 11L of fluids. The larger 60" x 36" will absorb and trap up to 2.5L of fluid. Both mats can be cut with a scissor to fit in custom areas.

The Saris Leveling Block keeps your bike level with your trainer. - Adds stability to your training ride. - For use with any rear wheel-mounted trainer. - Raises front bicycle tire 1.1 inches (2.8 cm) off the ground

Giant's Cyclotron Chopping Block supports and lifts your front wheel so you ride a level bike when you're on a trainer. It holds 700c and 26-inch wheels and has a stable, anti-skid base. It's made of ABS plastic for strength, low weight, and durability.

The Skyliner is a front wheel support for use with Tacx classic trainers. It raises and supports the front wheel for a natural cycling position and increased stability. It also serves as a handle to carry the trainer.

Your riding doesn’t need to stop when the weather gets cold. Features - Giant road thru-axle trainer axle - Alloy construction - For use on 2017+ Giant road bikes with a 142x12mm rear thru-axle

The Mission Tracker tire is an affordable modern tire that features a slick style tread design. A balanced rubber compound keeps you rolling faster while providing softer landings and plenty of grip. Thicker sidewalls reduce flats and improve your ride at lower tire pressures. - Max pressure: 60psi - Weight: 33.0oz

The E-Thru Trainer Axle allows the use of a mountain bike in a Tacx trainer. These axles are only suitable for Tacx classic trainers.

The Tacx trainer tires have been developed specifically for riding indoors on bike trainers. The special rubber minimizes the risk of overheating, slipping, and wear and tear. They are also quieter than regular rear tires on both road and mountain bikes. Tacx trainer tires are not suitable for outside riding.

The Trainer Adapter for X-12 Axle allows the use of mountain bikes with axle widths of 142mm or larger on a Tacx trainer. These adapters are only suitable for the Tacx classic trainers.

- Rear tire specially made for indoor trainer - The compound has a much lower internal resistance

Coupler for 1-7/8 " balls for RACKandROLL trailer.

Coupler for 2" balls for RACKandROLL trailer. Product Specs: - Weight: 4.12 lbs. - Dimensions: L 11.00 in x W 3.90 in x H 5.00 in - Limited One Year Warranty

Indoor-training has never been so technical! Featuring our special compound and tread pattern and our strongest casing, this tire is designed expressly to disperse heat and reduce noise generated by home trainers. Keep your race tires clean and safe for race day, and spend your indoor-training miles on the Zaffiro Pro Home Trainer.

Trainer ready. Keep the ride going by putting your Cannondale on a trainer with the 2-in-1 trainer axle. Where it thrives: The open road, on the trainer What it's built for: Versatility, convenience Highlights: - Fit your Cannondale road bike to any indoor trainer Removable end caps for outdoor riding - Compatible with Cannondale road bikes that utilize Speed Release dropouts

Trainer ready. Keep the ride going by putting your Cannondale on a trainer with the 2-in-1 trainer axle. Where it thrives: The open road, on the trainer What it's built for: Versatility, convenience Highlights: - Fit your Cannondale road bike to any indoor trainer Removable end caps for outdoor riding - Compatible with Cannondale road bikes that utilize Syntace X-12 dropouts

The Tracer Pro 2Bliss Ready features an all around cyclocross tread for mostly hard-packed courses. The tread remains stable at low tire pressures, while the Tracer rolls smooth on tarmac and finds grip when taking tricky turns onto gravel or grass. The GRIPTON compound, meanwhile, stays supple in freezing temperatures and even delivers surprising grip over wet roots. All this makes the Tracer a tremendous gravel and adventure tire, as it rolls well on asphalt and hooks up on earth and gravel. And with this 2Bliss Ready version, you'll also benefit from its versatility, ability to run lower tire pressures, and added puncture protection. - Casing: 60 TPI - Bead: Foldable - Butyl wrapped bead = 2Bliss Ready - Compound: GRIPTON - Flat Protection 700x33mm: BlackBelt; 700x38mm: Endurant Casing and BlackBelt

The Giant Indoor Trainer Mat is the perfect noise-reducing floor protection for indoor training. - Rubberized material for easy rinse off after your workout - ‘Pebbled’ surface, anti-skid and scratch-resistant material protects flooring while working out - Extra-large 3’ x 6’ (91.5cm x 183cm) size covers entire workout area, prevents perspiration from getting on carpets or wood floors - Comes rolled-up in draw-string, mesh carry bag with shoulder strap

- Large and rollable trainer mat - Made from high quality, water-repellent 6mm thick foam - Protects your floor against scratches and sweat - Muffles noise and vibrations - 180 x 85 cm

Use this ANT+ antenna to connect an ANT+ trainer to your computer. That enables you to use computer software during your training sessions, such as the Tacx Trainer software, Zwift, and TrainerRoad. These programs read the training data transmitted by an ANT+ trainer and can control the trainer. It features a long cable so the receiver can be placed close to the trainer for an optimal reception without loss. The antenna is compatible with all trainers that communicate wirelessly via ANT+.

The Wahoo KICKR Floormat is the perfect partner for your KICKR. It's water resistant and anti-slip to keep the trainer in place no matter how much you sweat! The thickness and material make it noise insulating, so your family will thank you during those early morning rides. - Impervious to sweat and spilled water bottles. - Gripping texture keeps the KICKR in place, so you can focus on your ride. - Material helps to reduce noise and make the KICKR even quieter. - Beveled edge keeps the mat in line with the floor.

The new tubeless-ready S-Works Tracer is made for CX racing in dry and intermediate conditions and spec’d with a light and supple 120 TPI casing with grippy T7 GRIPTON® compound. This rubber grips in all course conditions and will give you confidence on every race lap. The new GRID RACE sidewall protection is a lightweight cross-woven polyamide mesh, which is tear- and puncture-resistant but still very elastic for a supple ride. GRID RACE provides the best combination of protection, low weight, and speed, all while maintaining a responsive feel. A strong bead holds to the rim at low tire pressures, and the tire cross-section is designed to meet the UCI rule of 33 mm on a wide modern rim shape. - Casing: 120 TPI - Bead: Folding - Butyl wrapped bead = 2Bliss Ready - Compound: GRIPTON® T7 - Protection: GRID RACE - 700 x 33mm, psi 25~50, approximate weight 360g

BSD Raider BMX Handlebars - David Grant Signature Handlebar - Post weld heat treated 4130 - Backsweep: 11 degrees - Upsweep: 2 degrees

Give your Tacx trainer the best possible protection for storage and transport with this sturdy trainer bag. It's designed specifically for Tacx trainers and has a separate compartment on the inside for accessories. The double inner layer with foam lining provides optimum protection, minimizing the risk of damage.

No fancy gizmos. No wires. No fuss. If you’re looking for an easy way to ride your bicycle indoors, call off the search – you’ve found it. Whether your training for a local charity ride or working to beat your friend’s FitBit score, the Mag indoor bike trainer can help you make it happen. Simply connect the trainer to the rear wheel of your bike, hop on, and pedal away. Plus, the Mag comes with five adjustable levels of resistance so you can adapt every ride to your liking. - Magnetic resistance unit provides a quiet and frictionless ride. - Linear resistance boosts workout intensity to match each pedal stroke and gear click. - Features five adjustable levels of resistance - Compatible with Zwift and other indoor training apps

The Tracer features an all around cyclocross tread for predominately hard-packed courses. The tread remains stable at low tire pressures, rolls smooth on tarmac, and finds grip when taking tricky turns onto gravel or grass. The GRIPTON compound, meanwhile, stays supple in freezing temperatures and even delivers surprising grip over wet roots. So when you're serious about your CX racing, the cotton casing Tracer Tubular is a perfect choice. - Casing: 290 TPI - Latex inner tube - Compound: GRIPTON - 28" x 33mm, PSI 20-90, Approximate weight: 435g

The design brief was clear: Create a comfortable, capable flat pedal shoe with the grip and support that recreational, adventure and e-bike riders need to be confident over all kinds of terrain. The Tracker Fastlace fits on all points. It starts by putting the foot closer to the pedal and features a flat profile for an optimal contact patch with the pedal surface and pins. A dual-layer EVA midsole provides comfort for off-the-bike hikes. Finally, the Tack Rubber outsole's highly elastic compound allows it to stretch and form around pedal pins for excellent grip while riding rough, rugged terrain, making the Tracker Fastlace an ideal shoe for everyday rides and epic adventures.