Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Your Search: "stages"

$106.99
The Stages Spindles "G" bottom bracket spindle allows the retrofit of the carbon Stages Power meter for SRAM BB30 DUB MTB cranksets. The spindle is manufactured for Stages Cycling by Full Speed Ahead, forged and machined out of aluminum to allow for the carbon Stages Power meter for FSA 386 EVO and Stages Carbon 30mm model to be used with SRAM DUB MTB. The Stages Power meter 30mm spindle is specifically designed to meet or exceed the performance of the manufacturer's stock component, while allowing the retrofit of the new carbon Stages Power Meter to a rider's SRAM drivetrain. - Spindle only
$62.99
Stages magnet-free Speed sensors fit to your hub to provide real-time, accelerometer-based speed data to your cyclometer or phone via ANT+ and Bluetooth Smart. - Compatible with most wheels - Installs/removes in seconds - IPX7 Water Resistant - Super light—just 8 grams - Runtime: 600 hours - Operating range: 2-60 mph - Blue and red LEDs indicate pairing, activation, and low battery status
$62.99
Stages magnet-free Cadence sensors fit to your crank arm and rear hub to provide real-time, accelerometer-based cadence data to your cyclometer or phone via ANT+ and Bluetooth Smart. - Compatible with most crank arms - Installs/removes in seconds - IPX7 Water-resistant - Super light—just 8 grams - Runtime: 600 hours - Operating range: 18-200 rpm - Blue and red LEDs indicate pairing, activation, and low battery status
$92.99
Designed to provide hundreds of hours of indoor cycling comfort, the contemporary short-nose saddle shape with ergonomic cutout reduces pressure on sensitive areas. Ride-tuned MCU foam density provides the optimal amount of padding—not too soft, not too firm. - Traditional CrMo rail design - Seat Mast not included
$759.99
The new Gen 3 single-sided Stages Power L meter is built on to a non-drive-side Stages Carbon crank arm and it compatible with SRAM GXP road drivetrains. Tour Proven. Stages Power has carried riders to three consecutive Tour de France victories, plus many more world and national championships. If you believe racing provides the world’s best product proving ground, then Stages Power is proven as the world’s best power meter. Active Temperature Compensation as standard equipment. Consistency of measurement is the most important feature of a power meter. Stages Power was the first meter to make temperature compensation an automatic process ensuring accurate readings no matter the environmental conditions. Individual meter calibration for the most accurate results. Stages Power meters are calibrated individually to ensure a +/- 1.5% accuracy level. Individual calibration means that you can trust the data produced by our system. Additional features: - ± 1.5 % accuracy in all conditions - Active temperature compensation - Accelerometer based cadence measurement - Wirelessly upgradable firmware - LED indicator displays battery level at start up (with no need for connect to an app) and confirms successful zero reset - Updated accelerometer and addition of gyroscope for improved cadence resolution - Upgraded BLE and ANT+ radios offer a 6X improvement of data transmission strength Specifications - Power meter housing: low profile design, with robust door interface - Weight: Only adds 15g to base crank arm - Battery Life: 200+ hours (coin cell: CR2032) when used as a single sided meter - Power range (Watts): 0 to 5000 - Cadence range (rpm): 10-220 - Water resistance rating: IPX7 In the box - Power Meter - High quality CR2032 coin cell battery - Lifetime access to Stages Link for power meter management and firmware upgrades. - 2 months free access to Stages Link premium training and coaching features. - Product Identification Card with Serial Number and ANT+ I.D. Number. - User Guide
$713.99
The new Gen 3 single-sided Stages Power L meter is built on to a non-drive-side Shimano Dura-Ace R9100 crank arm and is compatible with all Shimano Hollowtech II road drivetrains. Tour Proven. Stages Power has carried riders to three consecutive Tour de France victories, plus many more world and national championships. If you believe racing provides the world’s best product proving ground, then Stages Power is proven as the world’s best power meter. Active Temperature Compensation as standard equipment. Consistency of measurement is the most important feature of a power meter. Stages Power was the first meter to make temperature compensation an automatic process ensuring accurate readings no matter the environmental conditions. Individual meter calibration for the most accurate results. Stages Power meters are calibrated individually to ensure a +/- 1.5% accuracy level, which is an industry best for non-scientific power meters. Individual calibration means that you can trust the data produced by our system. Additional features: - ± 1.5 % accuracy in all conditions - Active temperature compensation - Accelerometer based cadence measurement - Wirelessly upgradable firmware - LED indicator displays battery level at start up (with no need for connect to an app) and confirms successful zero reset - Updated accelerometer and addition of gyroscope for improved cadence resolution - Upgraded BLE and ANT+ radios offer a 6X improvement of data transmission strength Specifications - Power meter housing: low profile design, with robust door interface - Weight: Only adds 15g to base crank arm - Battery Life: 200+ hours (coin cell: CR2032) when used as a single sided meter - Power range (Watts): 0 to 5000 - Cadence range (rpm): 10-220 - Water resistance rating: IPX7 In the box: - Power Meter - High quality CR2032 coin cell battery - Lifetime access to Stages Link for power meter management and firmware upgrades. - 2 months free access to Stages Link premium training and coaching features. - Product Identification Card with Serial Number and ANT+ I.D. Number. - User Guide
$585.99
Stages Gen 3 single-sided Power L meter is built onto a non-drive-side Shimano GRX RX-810 crank arm. It's compatible with all Shimano GRX Cranksets. Tour Proven Stages Power has carried riders to three consecutive Tour de France victories, plus many more world and national championships. If you believe racing provides the world's best product-proving ground, then Stages Power is proven as the world's best power meter. Active Temperature Compensation as Standard Equipment Consistency of measurement is the most important feature of a power meter. Stages Power was the first meter to make temperature compensation an automatic process, ensuring accurate readings no matter the environmental conditions. Individual meter calibration for the most accurate results. Stages Power meters are calibrated individually to ensure a +/- 1.5% accuracy level. Individual calibration means that you can trust the data produced by our system. Additional features: - +/- 1.5% accuracy in all conditions - Active temperature compensation - Accelerometer-based cadence measurement - Wirelessly upgradable firmware - LED indicator displays battery level at start up (with no need to connect to an app) and confirms successful zero reset - Updated accelerometer and addition of gyroscope for improved cadence resolution - Upgraded BLE and ANT+ radios offer a 6X improvement of data transmission strength Specifications: - Accuracy: +/- 1.5% - Power meter housing: low-profile design, with robust door interface - Weight: Only adds 15g to base crank arm - Battery Life: 200+ hours (coin cell: CR2032) when used as a single-sided meter - Power range (Watts): 0 to 5000 - Cadence range (rpm): 10-220 - Water resistance rating: IPX7 Sizing Options: - Lengths: 170mm, 172.5mm 175mm Compatibility: - This Shimano GRX RX810 Stages Power meter is compatible with all Shimano GRX cranksets. - Frame Compatibility: Most frames - Device Compatibility: ANT+, Bluetooth Smart Ready - Software Compatibility: Stages Link, Training Peaks, Strava, Garmin Training Center, and others
$553.99
The new Gen 3 single-sided Stages Power L meter is built on to a non-drive-side Shimano Ultegra R8000 crank arm and is compatible with all Shimano Hollowtech II road drivetrains. Tour Proven. Stages Power has carried riders to three consecutive Tour de France victories, plus many more world and national championships. If you believe racing provides the world’s best product proving ground, then Stages Power is proven as the world’s best power meter. Active Temperature Compensation as standard equipment. Consistency of measurement is the most important feature of a power meter. Stages Power was the first meter to make temperature compensation an automatic process ensuring accurate readings no matter the environmental conditions. Individual meter calibration for the most accurate results. Stages Power meters are calibrated individually to ensure a +/- 1.5% accuracy level. Individual calibration means that you can trust the data produced by our system. Additional features: - ± 1.5% accuracy in all conditions - Active temperature compensation - Accelerometer based cadence measurement - Wirelessly upgradable firmware - LED indicator displays battery level at start up (with no need for connect to an app) and confirms successful zero reset - Updated accelerometer and addition of gyroscope for improved cadence resolution - Upgraded BLE and ANT+ radios offer a 6X improvement of data transmission strength Specifications - Power meter housing: low profile design, with robust door interface - Weight: Only adds 15g to base crank arm - Battery Life: 200+ hours (coin cell: CR2032) when used as a single sided meter - Power range (Watts): 0 to 5000 - Cadence range (rpm): 10-220 - Water resistance rating: IPX7 - Sizing Options: - Lengths: 165mm, 170mm, 172.5mm, 175mm Includes: - Power Meter - High quality CR2032 coin cell battery - Lifetime access to Stages Link for power meter management and firmware upgrades. - 2 months free access to Stages Link premium training and coaching features. - Product Identification Card with Serial Number and ANT+ I.D. Number. - User Guide
$759.99
The new Gen 3 single-sided Stages Power L meter is built on to a non-drive-side FSA SL-K BB30 crank arm. Tour Proven. Stages Power has carried riders to three consecutive Tour de France victories, plus many more world and national championships. If you believe racing provides the world’s best product proving ground, then Stages Power is proven as the world’s best power meter. Active Temperature Compensation as standard equipment. Consistency of measurement is the most important feature of a power meter. Stages Power was the first meter to make temperature compensation an automatic process ensuring accurate readings no matter the environmental conditions. Individual meter calibration for the most accurate results. Stages Power meters are calibrated individually to ensure a +/- 1.5% accuracy level. Individual calibration means that you can trust the data produced by our system. Additional features: - ± 1.5 % accuracy in all conditions - Active temperature compensation - Accelerometer based cadence measurement - Wirelessly upgradable firmware - LED indicator displays battery level at start up (with no need for connect to an app) and confirms successful zero reset - Updated accelerometer and addition of gyroscope for improved cadence resolution - Upgraded BLE and ANT+ radios offer a 6X improvement of data transmission strength Specifications - Power meter housing: low profile design, with robust door interface - Weight: Only adds 15g to base crank arm - Battery Life: 200+ hours (coin cell: CR2032) when used as a single sided meter - Power range (Watts): 0 to 5000 - Cadence range (rpm): 10-220 - Water resistance rating: IPX7 In the box - Power Meter - High quality CR2032 coin cell battery - Lifetime access to Stages Link for power meter management and firmware upgrades. - 2 months free access to Stages Link premium training and coaching features. - Product Identification Card with Serial Number and ANT+ I.D. Number. - User Guide
$759.99
The new Gen 3 single-sided Stages Power L meter is built on to a non-drive-side Stages Carbon crank arm and it compatible with SRAM GXP MTB drivetrains (168mm Q-factor). Stages Power MTB. Power isn't just for roadies. Stages Power meters are ridden by world and national champions in every discipline of cycling. From weekend warriors to BMC Factory Racing, Trek Factory Racing XC and Olympian Chloe Woodruff, Stages Power for MTB is ridden by the best athletes in the world. Active Temperature Compensation as standard equipment. Consistency of measurement is the most important feature of a power meter. Stages Power was the first meter to make temperature compensation an automatic process ensuring accurate readings no matter the environmental conditions. Individual meter calibration for the most accurate results. Stages Power meters are calibrated individually to ensure a +/- 1.5% accuracy level. Individual calibration means that you can trust the data produced by our system. Additional features: - ± 1.5 % accuracy in all conditions - Active temperature compensation - Accelerometer based cadence measurement - Wirelessly upgradable firmware - LED indicator displays battery level at start up (with no need for connect to an app) and confirms successful zero reset - Updated accelerometer and addition of gyroscope for improved cadence resolution - Upgraded BLE and ANT+ radios offer a 6X improvement of data transmission strength Specifications - Power meter housing: low profile design, with robust door interface - Weight: Only adds 15g to base crank arm - Battery Life: 200+ hours (coin cell: CR2032) when used as a single sided meter - Power range (Watts): 0 to 5000 - Cadence range (rpm): 10-220 - Water resistance rating: IPX7 In the box - Power Meter - High quality CR2032 coin cell battery - Lifetime access to Stages Link for power meter management and firmware upgrades. - 2 months free access to Stages Link premium training and coaching features. - Product Identification Card with Serial Number and ANT+ I.D. Number. - User Guide
$849.99
The new Gen 3 single-sided Stages Power L meter is built on to a non-drive-side Shimano Saint M820/M825 crank arm. Stages Power for DH. From the death defying rides of the Atherton's, Danny Hart and Jill Kintner, Stages Power is the tool to help anyone explore their best. For downhill bike riders we offer a Stages Power meter available as a power meter only non-drive crank arm for existing Shimano Saint cranks. Active Temperature Compensation as standard equipment. Consistency of measurement is the most important feature of a power meter. Stages Power was the first meter to make temperature compensation an automatic process ensuring accurate readings no matter the environmental conditions. Individual meter calibration for the most accurate results. Stages Power meters are calibrated individually to ensure a +/- 1.5% accuracy level. Individual calibration means that you can trust the data produced by our system. Additional features: - ± 1.5 % accuracy in all conditions - Active temperature compensation - Accelerometer based cadence measurement - Wirelessly upgradable firmware - LED indicator displays battery level at start up (with no need for connect to an app) and confirms successful zero reset - Updated accelerometer and addition of gyroscope for improved cadence resolution - Upgraded BLE and ANT+ radios offer a 6X improvement of data transmission strength Specifications - Power meter housing: low profile design, with robust door interface - Weight: Only adds 15g to base crank arm - Battery Life: 200+ hours (coin cell: CR2032) when used as a single sided meter - Power range (Watts): 0 to 5000 - Cadence range (rpm): 10-220 - Water resistance rating: IPX7 In the box: - Power Meter - High quality CR2032 coin cell battery - Lifetime access to Stages Link for power meter management and firmware upgrades. - 2 months free access to Stages Link premium training and coaching features. - Product Identification Card with Serial Number and ANT+ I.D. Number. - User Guide
$1,059.99
The new Gen 3 single-sided Stages Power L meter is built onto a non-drive-side Campagnolo Record 12s crank arm. Tour Proven Stages Power has carried riders to three consecutive Tour de France victories, plus many more world and national championships. If you believe racing provides the world's best product-proving ground, then Stages Power is proven as the world's best power meter. Active Temperature Compensation as Standard Equipment Consistency of measurement is the most important feature of a power meter. Stages Power was the first meter to make temperature compensation an automatic process, ensuring accurate readings no matter the environmental conditions. Individual meter calibration for the most accurate results. Stages Power meters are calibrated individually to ensure a +/- 1.5% accuracy level. Individual calibration means that you can trust the data produced by our system. Additional features: - +/- 1.5 % accuracy in all conditions - Active temperature compensation - Accelerometer-based cadence measurement - Wirelessly upgradable firmware - LED indicator displays battery level at start up (with no need to connect to an app) and confirms successful zero reset - Updated accelerometer and addition of gyroscope for improved cadence resolution - Upgraded BLE and ANT+ radios offer a 6X improvement of data transmission strength Specifications: - Accuracy: +/- 1.5% - Power meter housing: low-profile design with robust door interface - Weight: Only adds 15g to base crank arm - Battery Life: 200+ hours (coin cell: CR2032) when used as a single-sided meter - Power range (Watts): 0 to 5000 - Cadence range (rpm): 10-220 - Water resistance rating: IPX7 Sizing Options: - Lengths: 170mm, 172.5mm, 175mm Compatibility: This Campagnolo Record 12 Speed based Stages Power meter non-drive-side crank arm is only meant for use paired with a drive-side Campagnolo Record or Chorus crank arm. It will NOT mate with a Campagnolo Super Record crank arm. - Frame Compatibility: Most frames - Device Compatibility: ANT+, Bluetooth Smart Ready - Software Compatibility: Stages Link, Training Peaks, Strava, Garmin Training Center, and others
$1,149.99
The new Gen 3 Stages Power meter is built on to a Shimano Ultegra R8000 crankset. The Stages Power meter is placed on both the drive and non-drive side of the crank in order to independently measure a rider's left and right legs. Tour Proven. Stages Power has carried riders to three consecutive Tour de France victories, plus many more world and national championships. If you believe racing provides the world’s best product proving ground, then Stages Power is proven as the world’s best power meter. Active Temperature Compensation as standard equipment. Consistency of measurement is the most important feature of a power meter. Stages Power was the first meter to make temperature compensation an automatic process ensuring accurate readings no matter the environmental conditions. ATC is the key reason a rider can trust data from Stages Power in all conditions. Individual meter calibration for the most accurate results. Stages Power meters are calibrated individually to ensure a +/- 1.5% accuracy level. Individual calibration means that you can trust the bi-lateral data produced by our system, as it's a real measurement and not an estimation. Additional features: - +/- 1.5 % accuracy in all conditions - Active temperature compensation - Accelerometer based cadence measurement - Wirelessly upgradable firmware - LED indicator displays battery level at start up (with no need for connect to an app) and confirms successful zero reset - Updated accelerometer and addition of gyroscope for improved cadence resolution - Upgraded BLE and ANT+ radios offer a 6x improvement of data transmission strength Specifications - Power meter housing: low profile design, with robust door interface. Tool free battery replacement on the left arm and phillips head - screw access on the drive side - Weight: Only adds 35g to base crankset - Battery Life: 175+ hours (via 2 coin cell: CR2032) - Power range (Watts): 0 to 2500 - Cadence range (rpm): 20-220 - Water resistance rating: IPX7 In the box - Non-drive-side power meter - Drive-side power meter - Shimano chainrings - 2x high quality CR2032 coin cell battery - Lifetime access to Stages Link for power meter management and firmware upgrade. - 2 months free access to Stages Link premium training and coaching features. - Product Identification Card with Serial Number and ANT+ I.D. Number. - User Guide
$1,269.99
The new Gen 3 single-sided Stages Power L meter is built onto a non-drive-side Campagnolo Super Record crank arm. Tour Proven Stages Power has carried riders to three consecutive Tour de France victories, plus many more world and national championships. If you believe racing provides the world's best product-proving ground, then Stages Power is proven as the world's best power meter. Active Temperature Compensation as Standard Equipment Consistency of measurement is the most important feature of a power meter. Stages Power was the first meter to make temperature compensation an automatic process, ensuring accurate readings no matter the environmental conditions. Individual meter calibration for the most accurate results. Stages Power meters are calibrated individually to ensure a +/- 1.5% accuracy level. Individual calibration means that you can trust the data produced by our system. Additional features: - +/- 1.5 % accuracy in all conditions - Active temperature compensation - Accelerometer-based cadence measurement - Wirelessly upgradable firmware - LED indicator displays battery level at start up (with no need to connect to an app) and confirms successful zero reset - Updated accelerometer and addition of gyroscope for improved cadence resolution - Upgraded BLE and ANT+ radios offer a 6X improvement of data transmission strength Specifications: - Accuracy: +/- 1.5% - Power meter housing: low-profile design with robust door interface - Weight: Only adds 15g to base crank arm - Battery Life: 200+ hours (coin cell: CR2032) when used as a single-sided meter - Power range (Watts): 0 to 5000 - Cadence range (rpm): 10-220 - Water resistance rating: IPX7 Sizing Options: - Lengths: 170mm, 172.5mm, 175mm Compatibility: This Campagnolo Record 12 Speed based Stages Power meter non-drive-side crank arm is only meant for use paired with a drive-side Campagnolo Super Record 12s crank arm. - Frame Compatibility: Most frames - Device Compatibility: ANT+, Bluetooth Smart Ready - Software Compatibility: Stages Link, Training Peaks, Strava, Garmin Training Center, and others
$839.99
The new Gen 3 single-sided Stages Power L meter is built on to a non-drive-side Shimano Dura-Ace 7710 Track crank arm. Track Specific. Designed to meet the specific requirements of fixed gear track bikes, the Stages Power meter is the go-to choice for track racers at the World, Olympic and elite amateur levels. Active Temperature Compensation as standard equipment. Consistency of measurement is the most important feature of a power meter. Stages Power was the first meter to make temperature compensation an automatic process ensuring accurate readings no matter the environmental conditions. Individual meter calibration for the most accurate results. Stages Power meters are calibrated individually to ensure a +/- 1.5% accuracy level. Individual calibration means that you can trust the data produced by our system. Additional features: - ± 1.5 % accuracy in all conditions - Active temperature compensation - Accelerometer based cadence measurement - Wirelessly upgradable firmware - LED indicator displays battery level at start up (with no need for connect to an app) and confirms successful zero reset - Updated accelerometer and addition of gyroscope for improved cadence resolution - Upgraded BLE and ANT+ radios offer a 6X improvement of data transmission strength Specifications - Power meter housing: low profile design, with robust door interface - Weight: Only adds 15g to base crank arm - Battery Life: 200+ hours (coin cell: CR2032) when used as a single sided meter - Power range (Watts): 0 to 5000 - Cadence range (rpm): 10-220 - Water resistance rating: IPX7 In the box - Power Meter - High quality CR2032 coin cell battery - Lifetime access to Stages Link for power meter management and firmware upgrades. - 2 months free access to Stages Link premium training and coaching features. - Product Identification Card with Serial Number and ANT+ I.D. Number. - User Guide
$759.99
The new Gen 3 single-sided Stages Power L meter is built on to a non-drive-side Stages Carbon and built to retrofit SRAM (road and mountain), Race Face, and Easton cranks with Stages Power, with added spindle purchase. No additional spindle purchase required for FSA 386EVO cranks. This one Stages Power meter is built to rule them all—all of the most popular 30mm spindled crank sets, that is. Interchangeable 30mm spindles bring Stages Power carbon to numerous popular crank sets. In order to fit a vast array BB30 based crank sets—including, SRAM, RaceFace, and Easton, as well as FSA’s 386EVO —Stages' engineers have developed a range of bottom bracket spindles that serve to mate our super-light carbon Stages Power meter to more than 10 different 30mm spindled crank sets. Active Temperature Compensation as standard equipment. Consistency of measurement is the most important feature of a power meter. Stages Power was the first meter to make temperature compensation an automatic process ensuring accurate readings no matter the environmental conditions. Individual meter calibration for the most accurate results. Stages Power meters are calibrated individually to ensure a +/- 1.5% accuracy level. Individual calibration means that you can trust the data produced by our system. Additional features: - ± 1.5 % accuracy in all conditions - Active temperature compensation - Accelerometer based cadence measurement - Wirelessly upgradable firmware - LED indicator displays battery level at start up (with no need for connect to an app) and confirms successful zero reset - Updated accelerometer and addition of gyroscope for improved cadence resolution - Upgraded BLE and ANT+ radios offer a 6X improvement of data transmission strength Specifications - Power meter housing: low profile design, with robust door interface - Weight: Only adds 15g to base crank arm - Battery Life: 200+ hours (coin cell: CR2032) when used as a single sided meter - Power range (Watts): 0 to 5000 - Cadence range (rpm): 10-220 - Water resistance rating: IPX7 In the box - Power Meter - High quality CR2032 coin cell battery - Lifetime access to Stages Link for power meter management and firmware upgrades. - 2 months free access to Stages Link premium training and coaching features. - Product Identification Card with Serial Number and ANT+ I.D. Number. - User Guide
$699.99
The new Gen 3 single-sided Stages Power R meter is built on to a drive-side Shimano Ultegra R8000 crank arm and is compatible with all frames that fit Shimano Hollowtech II cranks. Tour Proven. Stages Power has carried riders to three consecutive Tour de France victories, plus many more world and national championships. If you believe racing provides the world’s best product proving ground, then Stages Power is proven as the world’s best power meter. Active Temperature Compensation as standard equipment. Consistency of measurement is the most important feature of a power meter. Stages Power was the first meter to make temperature compensation an automatic process ensuring accurate readings no matter the environmental conditions. Single drive-side power meter increases frame compatibility or upgrades an existing Stages Power L meter to Stages Power LR. Stages Power R offers increased compatibility with direct mount brakes and frames that lack adequate chainstay clearance, as well as the ability to upgrade existing Stages Power L power meters to Stages Power LR bi-lateral (dual) meter systems. Additional features: - ± 1.5 % accuracy in all conditions - Active temperature compensation - Accelerometer based cadence measurement - Wirelessly upgradable firmware - LED indicator displays battery level at start up (with no need for connect to an app) and confirms successful zero reset - Updated accelerometer and addition of gyroscope for improved cadence resolution - Upgraded BLE and ANT+ radios offer a 6X improvement of data transmission strength Specifications - Power meter housing: low profile design, 2x phillips head screw to access battery compartment - Weight: Only adds 20g to base crankset - Battery Life: 175+ hours (via coin cell: CR2032) - Power range (Watts): 0 to 5000 - Cadence range (rpm): 10-220 - Water resistance rating: IPX7 In the box - Drive-side power meter - High quality CR2032 coin cell battery - Lifetime access to Stages Link for power meter management and firmware upgrades. - 2 months free access to Stages Link premium training and coaching features. - Product Identification Card with Serial Number and ANT+ I.D. Number. - User Guide
$106.99
The spindles are manufactured for Stages Cycling by Full Speed Ahead, forged and machined out of aluminum to allow for the carbon Stages Power meter for FSA 386 EVO and Stages Carbon 30mm model to be used with many SRAM BB30 road and SRAM BB30 mountain bike drive side cranks, as well as SRAM DUB MTB, Race Face Next SL and Specialized S-Works Road. The Stages Power meter 30mm spindles are specifically designed to meet or exceed the performance of the manufacturer's stock component, while allowing the retro fit of the new carbon Stages Power Meter to a rider's SRAM and Race Face drivetrain. Stages Cycling BB spindles are available in six options: A) SRAM Red 22 BB30 B) SRAM Force 22, Rival 22, Force/Rival CX1 C) 2015MY SRAM BB30 mountain cranks - 9mm spacer* D) 2015MY SRAM BB30 mountain cranks - 15.5mm spacer* E) Race Face Next SL - 168mm q factor F) Specialized S-Works Road - 2017/2018MY G) SRAM DUB MTB * Not compatible with 156mm Q-factor
$69.99
Dual band, Bluetooth, ANT +, heart rate sensor with strap. - Battery: 2032 Battery Life is 900+ hours - Sensor Range: 30 bpm - 230 bpm ANT+ and Bluetooth data sensor compatibility - Sweatproof - YES!
$939.99
The new Gen 3 single-sided Stages Power R meter is built on to a driveside Shimano Dura-Ace R9100 crank arm and is compatible with all frames that fit Shimano Hollowtech II cranks. Tour Proven. Stages Power has carried riders to three consecutive Tour de France victories, plus many more world and national championships. If you believe racing provides the world’s best product proving ground, then Stages Power is proven as the world’s best power meter. Active Temperature Compensation as standard equipment. Consistency of measurement is the most important feature of a power meter. Stages Power was the first meter to make temperature compensation an automatic process ensuring accurate readings no matter the environmental conditions. ATC is the key reason a rider can trust data from Stages Power in all conditions. Single drive-side power meter increases frame compatibility or upgrades an existing Stages Power L meter to Stages Power LR. Stages Power R offers increased compatibility with direct mount brakes and frames that lack adequate chainstay clearance, as well as the ability to upgrade existing Stages Power L power meters to Stages Power LR bi-lateral (dual) meter systems. Additional features: - ± 1.5 % accuracy in all conditions - Active temperature compensation - Accelerometer based cadence measurement - Wirelessly upgradable firmware - LED indicator displays battery level at start up (with no need for connect to an app) and confirms successful zero reset - Updated accelerometer and addition of gyroscope for improved cadence resolution - Upgraded BLE and ANT+ radios offer a 6X improvement of data transmission strength Specifications - Power meter housing: low profile design, 2x phillips head screw to access battery compartment - Weight: Only adds 20g to base crankset - Battery Life: 175+ hours (via coin cell: CR2032) - Power range (Watts): 0 to 2500 - Cadence range (rpm): 20-220 - Water resistance rating: IPX7 In the box - Drive-side power meter - High quality CR2032 coin cell battery - Lifetime access to Stages Link for power meter management and firmware upgrades. - 2 months free access to Stages Link premium training and coaching features. - Product Identification Card with Serial Number and ANT+ I.D. Number. - User Guide
$4,399.99
From the world leader in power, Stages Cycling brings the experience of riding outdoors to your home with the StagesBike. Designed by the indoor cycling experts with a fitness-studio-quality, Stages Indoor cycling frame provides unsurpassed stability and durability and a quiet, maintenance-free Gates Carbon belt drive for countless miles of trouble-free indoor riding. At the heart of the StagesBike is a smooth, silent, electronic resistance unit providing up to 2200 watts of stunningly realistic road feel, right down to each electronic gear change. An oversized flywheel makes climbing, acceleration and coasting feel spot on. Standard road bars and saddle are included—and both can be swapped for your personal favorites, including aero bars. StagesBike brake hoods incorporate electronic shift buttons and separate "sprint" buttons. Riders can customize the function of each button and choose between several virtual drivetrains, simulating a variety of popular bike setups. With functional brake levers and steering buttons, the StagesBike is ready for the evolution of indoor cycling. Precision power measurement comes from a Stages Gen 3 Dual-Sided power meter. Multiple Tour de France victories can't be wrong—this is the most reliable and accurate way to bring your watts to the world of Watopia and beyond. With micro-adjust saddle fore/aft adjustment and handlebar reach/stack with laser-etched sizing scales, adjustable brake hoods, and crank arm settings ranging from 165mm to 175mm, you can tune the StagesBike to precisely replicate the fit and feel of your favorite bike and get the most out of your indoor miles. The StagesBike is optimized for the most popular indoor cycling platforms including Zwift, Trainer Road, Sufferfest, and others, with ANT and Bluetooth connectivity for all control modes. Two USB charging ports keep your devices juiced up during your ride, and an integrated adjustable tablet holder makes it easy to see the action. - Bike Weight: 138lbs - Bike Dimensions: 62.2in x 22.2in x 46.7in - Drivetrain: CarbonGlyde featuring Gates Carbon Drive - Shifting: Configurable buttons—additional Sprint Shifters included + Ports for up to 2 additional shift locations - Frame: High-strength steel - Hardware: Stainless Steel - Flywheel: 50lbs - Connectivity: ANT+ and Bluetooth - Power: Stages Power LR—Dual-Sided Power - Accuracy: 1.5% - Max Power: 2200w @ 130RPM - Q-Factor: 157mm - Max Rider Weight: 300lbs - Rider Fit: 4'10"in—6'10"in - Two USB ports - Tablet & phone holder - Dual water bottle holders - Standard road bar (31.8 mm) with sprint shifters + Climbing and Aero shifters available for purchase - Compatible with Aero Bars + Aero shifters available for purchase - Compatible with four different crank lengths—165 mm, 170 mm, 172.5 mm, 175 mm (pedals not included) - Wireless Firmware Updates
$415.78
Have another rider in your household who prefers a different saddle? Grab a second seat mast and swap them out in seconds between rides. With 335mm of height adjustment, 80mm of fore/aft adjustment and permanent laser-etched scales, it's quick and easy to dial in your precise fit every time. - Universal saddle clamp works with most saddle rail designs - Saddle not included
$260.00
The STAGE CAPTURE 16L sports backpack is EVOC's solution for transporting compact camera systems in extreme sport scenarios. Perfect carrying comfort and great back support provide the stability that is so vital for biking and winter sports, combined with all the features that photographers and filmmakers need. - Low profile back system that fits more snugly to the back - Ergonomically optimized hip belt and self-adjusting BRACE LINK shoulder belt system - Extra-wide, well-ventilated elastic hip belt made from AIROFLEX - The camera can be accessed easily and swiftly from the side - Individually adjustable camera compartment with padded compartment dividers - Simple, efficient organization as the camera compartment's cover can be folded right back on itself. - Optimal air circulation on the back due to the AIRFLOW CONTACT SYSTEM. - Ideal for mountain biking or alpine sports. - Additional compartments for laptop and hydration bladder, personal items and small parts
$39.99
High volume for big tires, high pressure for skinnies. Simple. The Airstick 2-stage is a durable aluminum pump with enough puff for mountain bike tires and enough pressure for road tubes too, thanks to the two-stage high pressure/high volume switch. - Presta head only - High Volume or High Pressure - Includes frame mount - 85 gr/ 3oz - 160 PSI, 11 Bar maximum
$144.99
The JoeBlow Sport with unique 2-stage design delivers both high pressure and high volume in record time. Stage one opens both barrels for huge volume, reaching 30 psi with 30% less effort than standard floor pumps. Stage two utilizes the small barrel for pressures up to 160 psi. Hammer type TwinHead DX5 pump head with an extra-long and tangle-free hose makes it easy to reach valve stems. A durable steel barrel and large steel base provide extra stability. - Head: Hammer type TwinHead DX5, Presta / Schrader / Dunlop valves with extra-long 360 pivot hose - Barrel: Painted steel / anodized aluminum - Gauge: 160 psi / 11 bar, 3" mid mount analog Stage 1 : 0 - 30 psi Stage 2 : 30 - 160 psi - Volume Per Stroke: 715cc (Stage 1), 258cc (Stage 2) - Handle: Oversize / Dual density polymer - Base: Hardened steel - Ball / bladder heads, Hose dock - Size: 74 x 26.6 x 18cm / 29.1" x 10.5" x 4.6" - Weight: 2.5kg / 5.51lb
$39.95
Thule's No-Sway Cages stabilize and prevent bike-to-bike contact on your hitch-mounted rack. They're only compatible with Thule's T3 cradles. You get 2 per pack (enough for 2 bikes).
$77.00
RockShox simplifies your pack with this HP 2-Stage Air Pump. Throw it in your pack for every ride and you have both a shock and tire pump that boasts a 300psi capacity. The aluminum construction makes it super durable and the head fits both presta and Schrader valves. A large removable gauge is easy to read and the air-release button makes fine tuning pressure in shocks and tires a breeze. And it includes a mounting clip to mount to water bottle bosses.
$26.99
- 5 DART plugs for use with the Stan's NoTubes DART tool
$34.99
Stan's Dual Action Repair for Tubeless (DART) fixes damaged tires faster, easier, and better than existing plug tools. While traditional tire plugs try to wedge rubber strips into a puncture, the DART creates a chemical reaction with your Stan's sealant to quickly form a permanent airtight bond. The DART's plastic tip is barbed to anchor firmly in place and stay put during even the most aggressive riding while being safer for rims, rim tape, and your hands. The material of the DART is also more flexible, and its laser-cut shape is optimized to contour to the shape of different punctures, maximizing surface area to increase the sealing reaction. Because the DART anchors to your tire and creates an instant bond with your sealant, it also won't pull out while riding the way a conventional plug can. One of the best features of the DART's design is that it doesn't require trimming once inserted, and excess material won't get in the way of your ride. DARTs can't be felt while riding, even on road tires, and they wear smooth naturally. - Repairs large punctures and slices - Reacts with Stan's sealant to form an instant, airtight seal - Barbed plastic tip anchors into tire and will not pull out when riding - Flexible material and laser-cut shape conforms to puncture and bonds with sealant - Wears off clean, no trimming needed, and can not be felt while riding, even on road tires - Lightweight, compact tool fits the shape of your hand for more precise use and includes built-in valve core remover - Includes two pre-loaded DARTs for sealing multiple and larger punctures - Clear caps keep DARTs clean and unthread quickly for fast deployment - Simple and easy to refill
$55.00
Spare parts for Quarq's ShockWiz automated suspension tuning device. - Contains a rubber mounting boot, four zip ties, plastic cap and two o-rings.
$49.99
For almost two decades, the Mammoth has established itself as a well-known standard for mountain bike mini-pumps. And with the rubberized t-handle and AnyValve head that auto-adapts to Presta, Schrader, and Dunlop valves, it’s even better than its legendary forebears. - AnyValve pump head automatically adapts to Presta, Schrader, and Dunlop valves - Rebuildable internals - Tough, lightweight aluminum barrel - Rubberized folding t-handle - Includes cage mount - 90 psi max pressure - 157g / 0.34lbs
$13.99
Removes Presta and Schrader valve cores. CNC machined, anodized finish with laser-etched logo. Fits between spokes for quick and easy core removal. Features knurled end for a no-slip grip.
$17.99 - $39.99
Can be used with Stan's ZTR rims to make them airtight or used as a lightweight rim tape in any rim. A single 10-yard roll will tape five 26-inch rims or four 29-inch rims or two wide road clincher rims. 21mm width fits: - ZTR Olympic - ZTR Iron Cross - ZTR 355 - ZTR Alpine - ZTR Crest - ZTR Alpha 340 (2 layers) - ZTR Alpha 400 (2 layers) - Most road clincher rims 25mm width fits: - ZTR 355 (26", 650b, 29") - ZTR Crest - Crest MK3 - ZTR Arch EX - ZTR Flow EX - Crest S1 27mm width fits: - ZTR Flow EX - ZTR Bravo - ZTR Hugo 52mm - Arch S1 - ZTR Rapid 28 - ZTR Rapid 30 - Arch MK3 30mm width fits: - ZTR Flow MK3
$34.99
COMFORT CONTROL Designed for Downhill and Enduro riding, the Giant’s swage series grips have several Giant-only designs from inner tube to grip surface. The exclusive integrated tube featuring a rear hollow design combines thicker rubber in the palm and a unique web pattern for the fingers to provide superior control and ergonomic comfort. - Innovative Integrated Tube provides stronger centered support while riding - Rear hollow structure combines with high-density rubber design better cushioning - Ergo hand-fit design features a thicker rubber compound in the palm and webbed design for comfort and enhanced damping - Giant-proprietary rubber compound increases control in any condition - Multi-grip surface combination improves friction for better control - Weight: 103g
$39.99
Stan's Threaded Valve Extenders let you convert deep-section rims to tubeless. They're precision-machined from aluminum and are designed to fit deep-dish carbon and aluminum rims. And, they're threaded on the outside so you can install the Presta lock-ring nut for a perfect seal.
$69.99
- Quick sealing and stop punctures up to 1/4 inch - Can be used year around - -09: Box of 12 bottles
$5.99 - $51.99
The Product that Started a Tubeless Revolution Inside this simple bottle is a product that changed cycling. Today's tubeless systems rely on the lighter, more reliable, self-sealing performance of Stan's Tire Sealant. Just two ounces of Stan's in a converted standard tire or tubeless tire can repair punctures up to 1/4-inch almost instantly to keep you rolling. Longer-lasting Stan's Tire Sealant is formulated to stay liquid in tires with even thin casings for up to seven months. Arid conditions require more frequent monitoring of sealant levels, but anti-freezing agents in our special formula allow Stan's Tire Sealant to be used in temperatures as cold as -30° F. One quart will convert up to 16 tires. - First choice of riders around the world for tubeless conversion and flat prevention - Seals punctures up to 1/4-inch (6.5mm) quickly - Stays liquid 2-7 months for long-lasting protection - Premium low-viscosity formula resists freezing to work in environments as cold as -30° F (-34° C) - Natural materials, safe for the environment - Can be injected through valve stems with removable cores compatible with tubes and tubular tires
$26.99
Use Stan's Tubeless Valve Stems when you're converting standard rims to tubeless via the taping method. These also have a removable core for easier application of tire sealant. Note: Schrader valve is for non-stepped Hugo rims. If your Hugo rim decal reads: - MAX RIM PRESSURE: 2.8 tires: 26psi, 3.0 tires: 24psi - ERD 615, 622x49.9, 29 in x 52.3mm Your rim has a stepped valve and is not compatible with this Schrader valve.
$189.99
- Light enough to take XC racing but was born from research and testing on the Enduro World Series circuit, making it a great rim for anyone looking to improve both descending and climbing - Asymmetric rim design allows for a stronger wheel while offering the easy inflation and Stan's trademark unmatched airtight seal. - 28mm internal width ideal for 2.2-2.5" tires - Light and durable 6069 aluminum with welded joint and reinforced spoke bed
$119.99
Durasync freehub bodies feature triple freehub bearings for increased axle stability to handle even greater vertical and torsional loads. This CNC machined durasync freehub is a direct replacement for your Neo hub, and includes pawls, springs, pawl retaining ring, and red freehub spacer. Bearings are pre-installed. - 6-pawl system provides 36 points of contact and 10-degree engagement for quick acceleration - Chromed steel bearings - Wide bearing stance and axle design reduces flex and adds durability - Low drag main seal prevents contamination and reduces resistance - Mini Driver has a Shimano HG spline, but is 10mm shorter to accept 11-speed cassettes with 10t cogs from Hope and OneUp Components
$59.99
Adapts Presta valve stems for use with standard Schrader pumps.
$35.99
- Tubeless Valve compatible with Stan's ZTR rim - Sold as a pair
$31.99
Stan's 3.30HD QR Hub Kit makes Stan's 3.30HD front hubs quick-release compatible. Installation is easy—just pull the old ones off and put the new ones on.
$169.99 - $189.99
- Asymmetric rim design allows for a stronger wheel while offering the easy inflation and Stan's trademark unmatched airtight seal. - 25mm width optimized for 40mm Gravel tires and up to 2.3'' mountain tires - Light and durable 6069 aluminum with welded joint and reinforced spoke bed
$869.99
- Asymmetric Bead Socket Technology brings Stan's legendary easy inflation and the most reliable airtight seal to wider, offset carbon rims - Custom carbon layup equalizes impact forces on both the long and short sides of the rim, making both stronger - Asymmetric rim shape with offset drilling improves bracing angle and balances spoke tension to create a stronger overall wheel - 250lb Recommended Maximum Rider Weight - 27.5": 420g, 29": 455g
$169.99 - $189.99
- Low-profile 30mm internal width optimizes tire shape, traction, and control for 2.3-2.6'' tires - Durable 6069 aluminum with welded joint and reinforced spoke bed - BST Asymmetric design combines Stan's legendary easy tubeless inflation with a stronger, more balanced wheel build - Reinforced spoke bed, combined with the offset drilling of the asymmetrical design, builds into an incredibly durable wheel that brings added confidence to every ride. Specs: - Rim Material: Aluminum - Rim Eyelets: No - Valve: Presta - Rim Construction: Double wall - Brake Type: Disc - Tire Type: Tubeless Ready
$4.99
- Replacement freehub bodies include pawls and springs pre-installed - M-Pulse hubs: six pawls are equipped with Neodymium magnets engaging every 1.66 deg - E-Sync hubs: fast 8.18 deg engagement with reinforced high-torque pawls - HG 11sp road FH body
$34.99
- Innovative Integrated Tube provides stronger centered support while riding. - Rear hollow structure combines with high-density rubber design better cushioning. - Ergo hand-fit design features thicker rubber compound in the palm and webbed design for comfort and enhanced damping. - Giant-proprietary rubber compound increases control in any condition. - Multi-grip surfaces combination improves friction for better control. - 132mm length
$19.99
Stan's 2oz Tire Sealant Injector measures the desired amount of sealant then attaches to your valve stem for easy, no-mess application. And, it works on Presta and Schrader valves!
$35.99
Stan's lightweight aluminum valve stems are half the weight of Stan's standard brass valves. The secure round base is compatible with most tubeless rims and a perfect fit for all Stan's BST rims. A removable valve core makes adding sealant easy, and these babies fit up to 8mm valve hole. Sold as a pair.
$319.99
- Replacement freehub bodies include pawls and springs pre-installed - M-Pulse hubs: six pawls are equipped with Neodymium magnets engaging every 1.66 deg - E-Sync hubs: fast 8.18 deg engagement with reinforced high-torque pawls - HG 11sp road FH body
$199.99
Based on the legendary Flow EX, the new Flow EX3 rim features Tiebeam, an internal reinforcement that offers unmatched impact resistance and the best air retention of any tubeless rim. The Flow EX3 combines the incredibly durable Tiebeam design of Stan's classic Flow EX with the 29mm internal width and 6069 aluminum construction of the popular Flow MK3 to create an entirely new rim built to handle today's faster, heavier, and more capable enduro, downhill and e-bikes. - Designed, tested, and raced to victories on the World Cup DH and Enduro World Series circuits - Tie-beam triple-cavity rim design resists damage and prevents air loss under impacts - 29mm internal width optimized for 2.35" to 2.8" Trail, All-mountain, and DH tires
$144.99
- Replacement freehub bodies include pawls and springs pre-installed - M-Pulse hubs: six pawls are equipped with Neodymium magnets engaging every 1.66 deg - E-Sync hubs: fast 8.18 deg engagement with reinforced high-torque pawls - HG 11sp road FH body
The new Flow MK3 is wider, stronger, and lighter. Flow’s legendary history on the World Cup DH circuit, combined with WideRight 29mm internal width, offers the perfect balance of tire stability for outstanding control at any speed. Genuine Bead Socket Technology rolls faster, corners harder, and withstands even bigger hits. Flow MK3 is born and bred for control at speed and perfect for technical trails and enduro racing thanks to increased lateral stiffness and durability. The new alloy is also even lighter, putting the new Flow MK3 in a class by itself for all-mountain performance. - 29mm internal width for tires up to 2.8" - Low-profile shape rolls faster, lasts longer, and helps stop tire pinch flats - Even lighter than the Flow EX - 25% stiffer and stronger for improved handling - More durable rim shape and alloy - Built on the proven success of our Flow EX on the World Cup DH circuit - Most trusted tubeless system for easy setup and low maintenance - WideRight optimized for Trail and All-mountain tires
$199.99
Based on the legendary Flow EX, the new Flow EX3 rim features Tiebeam, an internal reinforcement that offers unmatched impact resistance and the best air retention of any tubeless rim. The Flow EX3 combines the incredibly durable Tiebeam design of Stan's classic Flow EX with the 29mm internal width and 6069 aluminum construction of the popular Flow MK3 to create an entirely new rim built to handle today's faster, heavier and more capable enduro, downhill and e-bikes. - Designed, tested, and raced to victories on the World Cup DH and Enduro World Series circuits - Tie-beam triple-cavity rim design resists damage and prevents air loss under impacts - 29mm internal width optimized for 2.35" to 2.8" Trail, All-mountain, and DH tires
$9.99
- Replacement freehub bodies include pawls and springs pre-installed - M-Pulse hubs: six pawls are equipped with Neodymium magnets engaging every 1.66 deg - E-Sync hubs: fast 8.18 deg engagement with reinforced high-torque pawls - HG 11sp road FH body
$433.99
Designed with input from Stan's Enduro World Series teams, the new Arch MK3 is ready to own every trail. WideRight optimized for maximum stability with 2.25" to 2.5" tires, Stan's expanded the internal width out to 26mm while keeping the rim incredibly light. The 27.5" Arch MK3 weighs only 425g. A new proprietary alloy and stronger, low-profile rim shape means the new Arch MK3 is built to last. Featuring Bead Socket Technology, the new Arch MK3 also offers the unmatched traction, control, and reliability only found on genuine Stan’s NoTubes rims. - The perfect balance of strength and weight - 24% wider than the Arch EX for improved stability with larger tires - Same light weight as the Arch EX - Low-profile shape rolls faster, lasts longer, and helps stop tire pinch flats - 25% stiffer and stronger for improved handling - Lighter and more durable rim shape and alloy - Neo hubs accelerate quicker and last longer - Most trusted tubeless system for easy setup and low maintenance - Sapim Secure Lock aluminum nipples - WideRight optimized for Trail tires / 2.25 - 2.50 - Includes pre-installed tape for tubeless use and presta valve; 15x100mm front wheels include quick-release end caps and quick release; 20x110mm front wheels include 15x100mm end caps
$31.99 - $36.99
Front end cap conversion kits for NoTubes Neo and Neo Ultimate - SealLock end caps feature a low friction U-cup seal that snaps into place
$433.99
Wider and even lower in profile, the Crest MK3 sheds weight for faster acceleration and climbing. WideRight 23mm internal width increases tire volume for improved stability with wider tires. Inspired by Stan's carbon technology, the entirely new rim shape adds strength and virtually eliminates the chance of a tire pinch flat. Refined over the past 15 years, Bead Socket Technology offers the most trusted tubeless seal in the business, making the Crest MK3 the best choice for lightweight, tubeless XC performance. Crest MK3 wheels include: pre-installed tape for tubeless use and presta valve; 15x100mm front wheels include quick-release end caps and quick release. - 23mm internal rim width for more stability with larger tires - Low-profile shape rolls faster, lasts longer, and helps stop tire pinch flats - Laterally stiffer and stronger for improved handling - Wider but even lighter than the original Crest - More durable rim shape and alloy - Neo hubs accelerate quicker and last longer - Most trusted tubeless system for easy setup and low maintenance - Sapim Secure Lock aluminum nipples - Legendary Crest climbing and speed in a high volume rim
$37.99
Front SealLock end caps for Neo OS and Neo Ultimate OS hubs. SealLock end caps feature a low-friction U-cup seal that snaps into place and stays secure even when your wheel is removed from your bike. Not compatible with non-OS hubs or Centerlock hubs.
Page 1 of 2 Next page