Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Wheels

Zipp 202 Firecrest Carbon Clincher Tubeless Disc Brake 700c Rear
$1,804.00
The 202 Firecrest Carbon Clincher is a stiff, light weight and aerodynamic speed weapon ideal for every road. That's the power of Firecrest and Carbon Clincher technologies. The new 202 is the lightest entry in the Firecrest Carbon Clincher lineup, a do-it-all classic road wheel. This wheelset includes the 77/177 hubset. Firecrest rim technology affords the rider more speed, more stability, and more strength. This technology offers stable, predictable handling, and the wider rim increases lateral stiffness while offering greater vertical compliance Each Wheel Includes: - Zipp Tangente Quick Release Skewer - Zipp Tubeless valve – factory installed - Tubeless rim tape – factory installed - Valve core removal tool - Zipp 77D/177D thru-axle caps to fit 12x100, and 12x142 dropouts for rear wheels - Freehub body spacer – 11 to 10 speed - SRAM XDR driver body for 177D available separately
Zipp 202 NSW Carbon Clincher Wheels
$1,804.00 - $2,338.00
When Zipp gave their top engineers in The Nest advanced development lab the task of shedding more weight from their lightest carbon clincher wheelset, the 202 Firecrest, while also improving rolling friction, aerodynamics, and braking, it was a very tall order. When they asked them to do all of this without sacrificing durability, it looked like an impossibility. But the NSW advanced development team delivered on every request and built the ultimate climbing wheelset, a climbing wheelset strong enough to use on every ride. Engineered to be the fastest accelerating carbon clincher Zipp has ever made, 202 NSW flies up the toughest climbs, and then shaves even more time off of the descents to follow. And because extracting greater speed on the mountain is only half the battle, they built the 202 NSW to deliver the lowest aerodynamic drag available for a rim of this depth for speed everywhere else. In order for a climbing wheelset to be world beating it has to do more than simply deliver low weight; it has to deliver uncompromising performance on every level. This is why Zipp engineers in The Nest chose to enhance the world’s fastest climbing carbon clincher, the 202 Firecrest. With a new lighter carbon fiber layup for the 32mm deep 202 NSW, they’ve dropped weight where it matters most, at the outer edge of the wheel, while maintaining the durability and lateral stiffness that Firecrest is famous for. Then they reduced aerodynamic drag with ABLC Sawtooth technology and used ImPress graphics to ensure that nothing stood between the air flowing over the rim and the dimples made to smooth that flow. Knowing that there is no benefit to a wheelset that climbs fast and descends slow, NSW engineers incorporated their Showstopper brake track for the most confidence inspiring rim braking performance available, whether the road is wet or dry. To further improve the wheelset’s rolling efficiency, the 202 NSW rim is laced to their groundbreaking Cognition hubset. Built around their Axial Clutch freehub technology, the Cognition rear hub is engineered to maintain speed when coasting by disengaging the ratchet mechanism. This technology enables the Cognition rear hub to deliver far less rolling friction than wheels using conventional freehubs—a real advantage when fighting through rolling foothills or when spun out on long descents. Engineered for speed when approaching, ascending, traversing, and descending the world’s toughest mountain roads, the Zipp 202 NSW is a wheelset that can only come from one place, The Nest, where the world’s fastest wheels are made.
Zipp 303 Firecrest Carbon Clincher Tubeless Disc Brake 700c Rear
$1,804.00
Road bikes are going where they’ve never gone before, are expected to do more, and are being ridden harder than ever. At the same time disc brakes are rewriting the rules of what’s possible with rim design. For this new era, the Zipp 303 Firecrest Tubeless Disc-brake wheelset sets the new standard. With a disc-specific, tubeless rim, the 303 Firecrest Carbon Clincher is now internally 21mm wide and faster than ever. Designed from the start as a tubeless rim, the 303 Firecrest features a rim bed made with internal ridges to lock the tire’s bead in place, ensuring secure performance, even when ridden at lower tire pressures. A new carbon fiber layup keeps weight low while maintaining the 303’s legendary durability. The rim’s lightweight design allows the 303 to glide up the steepest climbs while SRAM's robust 77/177D hubset keep the wheels stiff and responsive. Each Wheel Includes: - Zipp Tubeless valve extender and valve-core wrench - Zipp rim tape (factory taped) - Zipp Tangente quick-release skewer - Zipp thru-axle end caps
Zipp 303 Firecrest Tubular Disc-Brake Rear Wheel
$1,804.00
Zipp’s new 303 Firecrest Tubular Disc-brake wheelsets offer fresh innovations for performance-minded cyclists. Retaining their versatile 45mm rim depth, 303 Firecrest Tubular rims now feature construction upgrades that deliver improved impact resistance. The new wheels also borrow key features from Zipp's halo-level NSW lineup. Both the rim and disc brake variants gain our ABLC Sawtooth dimple design for greater AeroBalance, while the rim brake version now includes our Showstopper brake track for the best braking control and shortest stopping distances in both wet and dry conditions. These innovations enhance the wheelset that’s been podium-proven in two of pro cycling’s harshest proving grounds, the Spring Classics and Cyclocross—and then takes that performance to the next level. - Sawtooth dimple pattern - Aero performance, sprinting stiffness, lightweight - 77/177 hubset - Thru-axle compatible
Zipp 404 Firecrest Carbon Clincher Tubeless Disc Brake 700c Rear
$1,804.00
Road bikes are ever evolving and ever inspiring. The new 404 Firecrest Carbon Clincher Tubeless Disc-brake wheelset offers cyclists everywhere the opportunity to experience superior braking and stopping power to match the speed and stability of SRAM's most popular and versatile 58mm rim depth. Aero has never been so affordable and attainable. The consistency and power of disc brakes provides precision modulation and stopping power, literally at your fingertips. As for speed, the 404 Firecrest is where the Firecrest Revolution began. If you had to choose just one wheel, the 404 Firecrest should be your choice. With a depth and shape proven in all conditions, it’s a classic all-around performer and the standard by which all other wheels are measured. At the center of the 404 Firecrest Carbon Clincher Tubeless Disc-brake is the durable and versatile 77/177D hubset, which offers options for riders to switch wheels from quick-release to thru-axle without tools. - Firecrest rim Technology provides world class handling and stability - 77/177d hubset, with its best-in-class durability and improved bearing protection, all with no pre-load adjustment needed - Aero performance, durable and Light Weight - To ensure compatibility with any bike, the versatile 77/177D hubs come with swappable end caps to work with QR’s and thru-axles - Tubeless ensuring secure performance even when ridden at lower tire pressures. - ISO 4210 compliant. See Declaration of Conformity for details.
Zipp 808 Firecrest Carbon Clincher Rim-Brake Rear Wheel
$1,804.00
Optimizing wheels to perform with precision and control at the depth of the 808 Firecrest Carbon Clincher is pure engineering science. While the 808 Firecrest’s aerodynamics and stability are proven every weekend in road races, triathlons and time trials around the world, understanding how profoundly good these wheels only comes from riding the wheel that, as a set, have proven faster than any other. At the center of the 808 Firecrest Carbon Clincher is Zipp’s 77/177 hubset with best-in-class durability and improved bearing protection with no pre-load adjustment needed. The result is improved braking (Showstopper), aero performance, stiffness, durability, simplicity, and versatility. - New, faster, more stable rim profile - AeroBalance - ABLC SawTooth dimples pattern - Showstopper brake track - 10- or 11- speed compatible - XDR option - 77/177 hubset - Handcrafted in the USA
Zipp 404 NSW Carbon Clincher Tubeless Disc-Brake Front Wheel
$1,871.00
The Zipp 404 NSW Carbon Clincher Tubeless Disc-brake offers a new rim shape with greater aerodynamic efficiency and reduced side force as well as the new Cognition disc-brake hubset for increased durability and less drag. The 404 NSW, with a rim depth of 58mm, is designed for road cyclists and triathletes looking for increased speed and stability. - Superior modulation and stopping power of disc brakes - 404 NSW rolls efficiently whether you are pedaling or coasting - Uses Zipp’s ImPress graphics technology, which prints graphics directly on the wheel, to help allow the dimples control vortex shedding, the rate at which air sheds off the wheel - Tubeless ensuring secure performance even when ridden at lower tire pressures
Zipp 404 NSW Carbon Clincher Tubeless Rim-Brake Front Wheel
$1,871.00
The Zipp 404 NSW Carbon Clincher Tubeless Rim-brake offers a new rim shape with greater aerodynamic efficiency and reduced side force as well as our Cognition hubset for increased durability and less drag. The 404 NSW, with a rim depth of 58mm, is designed for road cyclists and triathletes looking for increased speed and stability. - 58mm rim profile, tubeless compatible for increased speed and better cornering, control and comfort - ImPress graphics technology prints graphics directly onto the rim, for better airflow management, light weight, and durability - ABLC Sawtooth dimple design helps manage air flow around the rim and contributes to a faster, more stable wheel - Industry-leading Showstopper brake track: powerful and consistent braking, even on the wet - ISO 4210 compliant. See Declaration of Conformity for details
Zipp 404 Firecrest Carbon Tubeless Disc Brake Rear
$1,928.00
Zipp's 404 Firecrest Tubeless Disc-brake wheels are a go-to speed weapon for any situation. Their aero and crosswind-stable 58mm rim depth is ideal for road races, time trial and triathlon, gran fondos, and endless training over all types of terrain. The 404 Firecrest Tubeless Disc brake is infused with technologies developed in our Indianapolis advanced development lab. Zipp's ABLC Sawtooth Technology uses a complex dimpling pattern to improve aero efficiency. At the center of the 404 Firecrest Tubeless Disc-brake is a versatile and durable new hubset, the German-engineered ZR1 DB. If you had to choose just one wheel for road riding and racing, the 404 Firecrest Tubeless Disc brake is a savvy and speedy choice. - All-around aero 58mm rim depth with proven crosswind stability - ABLC Sawtooth dimple design helps manage airflow around the rim and contributes to a faster, more stable wheel - Tubeless, ensuring secure performance even when ridden at lower tire pressures - ZR1 DB hub is engineered in Germany with better seal design for improved durability and quicker response with 66 points of engagement - Superior modulation and stopping power of disc brakes - New Zipp graphics and cosmetic identity that scream speed - Center Lock rotor interface (lockring included) - Ships with 12mm end caps
Zipp 303 NSW Carbon Clincher Wheel
$1,934.99
Built on the foundation laid by Firecrest, offering unrivaled crosswind stability and the most aerodynamically efficient rim design on the market, the 303 NSW takes it all to the next level. Like its siblings, 404 NSW and 808 NSW, Zipp's top engineers in The Nest advanced development lab incorporated improved aerodynamics, industry leading braking performance, and reduced rolling friction to produce the lightest, highest-performance 303 wheelset Zipp has ever made. Light enough to fly up climbs, tough enough to excel in the cobbled classics, and with the industry's best available braking performance for the most technical descents, the 45mm deep 303 NSW is built for a singular purpose: To be fast, everywhere. But the 303 NSW is no "race day only" wheelset to be tucked away in a wheel bag until a race number is pinned to the rider's jersey. It's built to take the abuse of everyday training rides. Zipp has achieved this reliability at a lighter weight with a revised carbon fiber layup developed through testing on the famed cobbles of the Forest of Arenberg with the world's fastest riders. Because the toughest roads often experience the toughest weather conditions, they've included Zipp's Showstopper brake track for braking performance that delivers the best modulation and shortest stopping distances in wet and dry conditions. And they've improved aerodynamics with their ABLC Sawtooth technology and Impress graphics to produce a rim that is as fast as it is stealthy. At the center of the 303 NSW wheelset is the Cognition hubset. Built to provide the lowest rolling friction possible without compromising sealing, the hub's Swiss-made bearings work in tandem with Zipp's Axial Clutch technology to dramatically cut rolling friction when compared with conventional freehub systems. Bottom line: Cognition hubs make the 303 NSW fast, even when you aren't pedaling. All of these technologies combine to build a wheelset that only NSW technology can produce, a wheelset with unrivaled performance. Wherever the road may take you, get there faster on Zipp 303 NSW wheels.
Zipp 202 NSW Carbon Tubeless Front
$1,999.00
Zipp's 202 NSW Tubeless Disc-brake wheels packs a heavy load of performance into a light and nimble package. This wheel flies up the toughest climbs, shaves time off descents, and handles deftly off pavement. For aero performance, Zipp's ABLC Sawtooth dimple design extends to the rim's edge. The 202 NSW Tubeless Disc-brake is optimized for wide tires with lower tire pressure to meet the performance needs of modern riders in search of low rolling resistance and high compliance. With an internal width of 21mm, these wheels are well suited for rough roads, testing fastest with a 28mm tire in the majority of wind angles. - Tubeless design provides secure performance when ridden at lower tire pressures - New Zipp graphics and cosmetic identity that scream speed, applied using Zipp's ImPress direct-print technology - Center Lock rotor interface (lockring included) - Ships with 12mm end caps
Zipp 303 NSW Carbon Clincher Tubeless Disc-Brake Front Wheel
$1,999.00
Light enough to fly up climbs, tough enough to excel in the cobbled classics, and with the industry’s best available braking performance for the most technical descents, the 45mm deep 303 NSW is built for a singular purpose: To be fast, everywhere. But the 303 NSW is no ‘race day only’ wheelset to be tucked away in a wheel bag until a race number is pinned to the rider’s jersey. It’s built to take the abuse of everyday training rides. Zipp has achieved this reliability at a lighter weight with a revised carbon fiber layup developed through testing on the famed cobbles of the Arenberg Forest with the world’s fastest riders. - 45 mm rim depth - Cognition Disc-brake hubset - ImPress Graphics - ABLC SawTooth Dimple pattern - Handcrafted in the USA
Zipp 404 NSW Carbon Tubeless Rim Brake Front
$1,999.00
No matter where you ride, the 404 NSW Carbon Clincher Tubeless rim-brake wheelset is engineered to make your ride faster. With a rim depth of 58mm, the 404 NSW is designed as a do-everything wheelset that is adept at climbing and maintaining speed on the flats; a wheel strong enough to handle the Spring Classics, but light enough to inspire sprints out of corners. The 404 NSW Tubeless features a rim shape that aerodynamically integrates wider tubeless tires for enhanced ride quality and performance. The 404 NSW Tubeless's 19mm internal rim width and corresponding outer rim shape are optimized for aerodynamic optimization with 25mm tires. This wheelset allows you to run tubeless or traditional clinchers. The benefits of tubeless include superior flat protection, the ability to run lower pressures, and a smoother ride with high cornering grip and low rolling resistance. - Fast 58mm rim depth, tubeless compatible for increased speed and better cornering, control, and comfort - ABLC Sawtooth dimple design helps manage airflow around the rim and contributes to a faster, more stable wheel - Industry-leading ShowStopper brake track: powerful and consistent braking, even in the wet - New graphics that scream speed, applied using Zipp's ImPress direct-print technology to help allow the dimples to do what they were designed to do—improve aero performance - Ships with QR end caps and quick release skewers
Zipp 808 Firecrest Carbon Clincher Tubeless Disc Brake 700c Rear
$2,004.00
There’s nothing middle of the road about the 808 Firecrest. At 82mm deep, it’s all out aero. Thanks to refinements to Zipp’s revolutionary Firecrest rim shape to be tubeless compatible and optimized for wider tires, the 808 Firecrest Carbon Clincher Tubeless Disc brake is ideal for the new era of disc brake road riding and racing. Without the constraints of rim brake caliper compatibility or brake-track requirements, the Firecrest Carbon Clincher Tubeless Disc-brake wheels offer the increased stopping power and modulation of disc brakes and a whole lot more. To maximize the aero performance of the wheels, Zipp’s ABLC dimples extend all the way to the outer edge of the disc-specific rims. The wheels are also optimized for wider tires to meet the performance needs of modern riders in search of low rolling resistance and aero efficiency with high comfort. The deeper Firecrest Tubeless Disc brake has an internal width of 19mm and are aerodynamically optimized for 25mm wide tires. This design improves Firecrest’s ability to yield low aerodynamic drag and high crosswind stability, a combination called AeroBalance. Designed to be tubeless compatible, the wheels feature a rim bed made with internal ridges to lock the tire’s bead in place, ensuring secure performance even when ridden at lower tire pressures. Zipp’s low rolling resistance and high grip Tangente RT28 and RT25 Road Tubeless tires pair well with the Firecrest disc brake wheels. A new carbon fiber layup for the Indianapolis-made rims keeps weight low while maintaining the Firecrest Carbon Clincher’s proven durability. The robust 77D/177D hubset, paired with 24 Sapim CX-Sprint spokes front and rear, keeps the wheels stiff and responsive. To ensure compatibility with any bike, the versatile 77D/177D hubs come with swappable end caps to work with QR’s and thru-axles, including 12x100mm and 15x100mm front thru-axles as well as 12x142mm rear thru-axles. The 177D rear hub is also XDR driver body compatible for use with SRAM 10-42 cassettes. Each Wheel Includes: - Zipp Tangente Quick Release Skewer - Zipp Tubeless valve – factory installed - Tubeless rim tape – factory installed - Valve core removal tool - Zipp 77D/177D thru-axle caps to fit 12x100, 15x100 dropouts for front wheels, and 12x142 dropouts for rear wheels - Freehub body spacer – 11 to 10 speed - SRAM XDR driver body for 177D available separately
Zipp 202 NSW Carbon Clincher Tubeless Cognition Disc-Brake Rear Wheel
$2,405.00
Engineered to be the fastest accelerating carbon clincher Zipp has ever made, the 202 NSW Carbon Clincher Tubeless Disc-brake flies up the toughest climbs, and then shaves even more time off of the descents to follow. And because extracting greater speed on the mountain is only half the battle, we built 202 NSW to deliver the lowest aerodynamic drag available for a tubeless rim of this depth for speed everywhere else. - Superior modulation and stopping power of disc brakes - 202 NSW rolls efficiently whether you are pedaling or coasting. The Axial Clutch technology allows the freehub’s ratcheting mechanism to deliver half the mechanical drag of conventional three-pawl hubs - Zipp’s ImPress graphics technology, which prints graphics directly on the wheel, to help control vortex shedding, the rate at which air sheds off the wheel - Tubeless ensuring secure performance even when ridden at lower tire pressures
Zipp 404 NSW Carbon Clincher Tubeless Disc-Brake Rear Wheel
$2,405.00
The Zipp 404 NSW Carbon Clincher Tubeless Disc-brake offers a new rim shape with greater aerodynamic efficiency and reduced side force as well as the new Cognition disc-brake hubset for increased durability and less drag. The 404 NSW, with a rim depth of 58mm, is designed for road cyclists and triathletes looking for increased speed and stability. - Superior modulation and stopping power of disc brakes - 404 NSW rolls efficiently whether you are pedaling or coasting. The Axial Clutch technology allows the freehub’s ratcheting mechanism to deliver half the mechanical drag of conventional three-pawl hubs - Uses Zipp’s ImPress graphics technology, which prints graphics directly on the wheel, to help allow the dimples control vortex shedding, the rate at which air sheds off the wheel - Tubeless ensuring secure performance even when ridden at lower tire pressures
Zipp 404 NSW Carbon Clincher Tubeless Rim-Brake Rear Wheel
$2,405.00
The Zipp 404 NSW Carbon Clincher Tubeless Rim-brake offers a new rim shape with greater aerodynamic efficiency and reduced side force as well as our Cognition hubset for increased durability and less drag. The 404 NSW, with a rim depth of 58mm, is designed for road cyclists and triathletes looking for increased speed and stability. - 58mm rim profile, tubeless compatible for increased speed and better cornering, control and comfort - Cognition hubset with Axial Clutch technology provides reduced drag when coasting - ImPress graphics technology prints graphics directly onto the rim, for better airflow management, light weight, and durability - ABLC Sawtooth dimple design helps manage air flow around the rim and contributes to a faster, more stable wheel - Industry-leading Showstopper brake track: powerful and consistent braking, even on the wet - ISO 4210 compliant. See Declaration of Conformity for details
Zipp 454 NSW Carbon Clincher Rim-Brake Front Wheel
$2,405.00
The 454 NSW delivers aerodynamic efficiency and crosswind stability that far surpasses conventionally shaped wheels. Its undulating 53/58mm-deep rim shape takes cues from some of nature’s most elegant design solutions and combines them with engineering precision for unrivaled durability and performance while delivering a level of AeroBalance unlike any wheel ever made. It is the ultimate mid-depth wheel for all-around road performance. - Hyperfoil - Cognition hubset - ImPress graphics - HexFin ABLC dimple pattern - Showstopper brake track - Carbon Clincher - AeroBalance - Handcrafted in the USA
Zipp 303 NSW Carbon Clincher Tubeless Disc-Brake Rear Wheel
$2,570.00
Light enough to fly up climbs, tough enough to excel in the cobbled classics, and with the industry’s best available braking performance for the most technical descents, the 45mm deep 303 NSW is built for a singular purpose: To be fast, everywhere. But the 303 NSW is no ‘race day only’ wheelset to be tucked away in a wheel bag until a race number is pinned to the rider’s jersey. It’s built to take the abuse of everyday training rides. Zipp has achieved this reliability at a lighter weight with a revised carbon fiber layup developed through testing on the famed cobbles of the Arenberg Forest with the world’s fastest riders. - 45 mm rim depth - Cognition Disc-brake hubset - Axial Clutch technology - ImPress Graphics - ABLC SawTooth Dimple pattern - Handcrafted in the USA
Zipp 808 NSW Carbon Clincher Tubeless Disc-Brake Rear Wheel
$2,606.00
As the inaugural wheelset in the Zipp NSW Series, the Zipp 808 NSW Carbon Clincher Tubeless Disc-Brake offers a new rim shape with greater aerodynamic efficiency and reduced side force as well as a new Cognition disc-brake hubset for increased stiffness and less drag. The 808 NSW, with a rim depth of 82mm, is designed for triathletes, time trialists or any cyclist looking for increased speed and stability. - Cognition Disc-brake hubset - Axial Clutch technology - ImPress Graphics - ABLC SawTooth Dimple pattern - Tubeless - Carbon Clincher - Disc-brake - AeroBalance - Handcrafted in the USA
Zipp 808 NSW Carbon Clincher Tubeless Rim-Brake Rear Wheel
$2,606.00
The Zipp 808 NSW Carbon Clincher Tubeless Rim-brake offers a new rim profile with greater aerodynamic efficiency and reduced side force as well as the Cognition hubset for increased stiffness and less drag. The 808 NSW, with a rim depth of 82mm, is designed for triathletes, time trialists or any cyclist looking for increased speed and stability. - COGNITION hubset - Axial Clutch technology - ImPress technology - ABLC SawTooth - Showstopper - Tubeless - New, faster, more stable AeroBalance rim profile - Handcrafted in the USA
Zipp 858 NSW Carbon Clincher Cognition Rim-Brake Front Wheel
$2,672.00
With the introduction of the radical biomimicry-derived 454 NSW Carbon Clincher, Zipp proved that aero efficiency and crosswind stability are not mutually exclusive aero wheel design goals. Using a similar Sawtooth rim design, the 858 NSW wheelset goes 24 millimeters deeper than the 454 and delivers even greater gains in aero efficiency while providing a level of rider control in crosswinds that was previously unthinkable with conventional deep-section wheel designs. By eliminating concerns over control, the 858 NSW ushers in a new era where aerodynamically efficient deep-section wheels are no longer a race-day-only option—they’re everyday wheels. Adding to the 858’s versatility, its lightweight and laterally stiff rim imparts a level of responsiveness previously only attributed to much shallower wheels, keeping bike handling lively and quick. The 858 delivers the best braking available thanks to Zipp's NSW-exclusive Showstopper brake track found on the rim brake version of the 858 NSW. Designed for road or triathlon applications, the 858 NSW’s advanced aero efficiency, crosswind stability, responsive handling, and unrivaled braking are engineered to make what was once impossible…possible. - Sawtooth rim with Hyperfoil nodes - Rim depth of 77/82mm - Cognition hubset - Axial Clutch technology - ImPress graphics - HexFin ABLC dimple pattern - ShowStopper - AeroBalance - Handcrafted in the USA
Zipp 454 NSW Carbon Clincher Disc-Brake Rear Wheel
$2,940.00
The 454 NSW Carbon Clincher Disc-brake delivers aerodynamic efficiency and crosswind stability that far surpasses conventionally shaped wheels with the superior modulation and stopping power of disc brakes. The 454 NSW’s undulating 53/58mm-deep rim shape takes cues from some of nature’s most elegant design solutions and combines them with engineering precision for unrivaled durability and performance while delivering a level of AeroBalance unlike any wheel ever made. Zipp engineers have optimized the biomimicry-derived 454 NSW for the ultimate in all conditions braking control—disc brakes. This marks the first NSW wheelset available for disc brakes, offering cyclists the greatest AeroBalance with the superior modulation and stopping power of disc brakes. It is the ultimate mid-depth wheel for all-around road performance. - Hyperfoil - Cognition Disc-brake hubset - Axial Clutch technology - ImPress graphics - HexFin ABLC dimple pattern - Carbon Clincher - AeroBalance - Handcrafted in the USA
Zipp 454 NSW Carbon Clincher Rim-Brake Rear Wheel
$2,940.00
The 454 NSW delivers aerodynamic efficiency and crosswind stability that far surpasses conventionally shaped wheels. Its undulating 53/58mm-deep rim shape takes cues from some of nature’s most elegant design solutions and combines them with engineering precision for unrivaled durability and performance while delivering a level of AeroBalance unlike any wheel ever made. It is the ultimate mid-depth wheel for all-around road performance. - Hyperfoil - Cognition hubset - ImPress graphics - HexFin ABLC dimple pattern - Showstopper brake track - Carbon Clincher - AeroBalance - Handcrafted in the USA
Zipp 858 NSW Carbon Clincher Cognition Rim-Brake Rear Wheel
$3,207.00
With the introduction of the radical biomimicry-derived 454 NSW Carbon Clincher, Zipp proved that aero efficiency and crosswind stability are not mutually exclusive aero wheel design goals. Using a similar Sawtooth rim design, the 858 NSW wheelset goes 24 millimeters deeper than the 454 and delivers even greater gains in aero efficiency while providing a level of rider control in crosswinds that was previously unthinkable with conventional deep-section wheel designs. By eliminating concerns over control, the 858 NSW ushers in a new era where aerodynamically efficient deep-section wheels are no longer a race-day-only option—they’re everyday wheels. Adding to the 858’s versatility, its lightweight and laterally stiff rim imparts a level of responsiveness previously only attributed to much shallower wheels, keeping bike handling lively and quick. The 858 delivers the best braking available thanks to Zipp's NSW-exclusive Showstopper brake track found on the rim brake version of the 858 NSW. Designed for road or triathlon applications, the 858 NSW’s advanced aero efficiency, crosswind stability, responsive handling, and unrivaled braking are engineered to make what was once impossible…possible. - Sawtooth rim with Hyperfoil nodes - Rim depth of 77/82mm - Cognition hubset - Axial Clutch technology - ImPress graphics - HexFin ABLC dimple pattern - ShowStopper - AeroBalance - Handcrafted in the USA
Zipp Super-9 Disc Carbon Rear Track Wheel (Tubular)
$3,237.99
Zipp’s Super-9 Disc Carbon Track Wheel underwent extensive fluid dynamic modeling, wind-tunnel testing, and relentless refinement so you can enjoy no-holds-barred aero domination. With a variance in width of just a single centimeter from rim to hub, the Super-9 is almost invisible to the wind. Plus the wide rim creates a virtually seamless integration with the tire, optimizing aerodynamics and allowing wider tires and less rolling resistance.
Zipp Super-9 Disc Carbon Rear Wheel (Tubular)
$3,274.99
Equip yourself with the wheel that carried Tony Martin to a World Championship and reach the pinnacle of your own potential. Zipp’s Super-9 Carbon Clincher Disc underwent extensive fluid dynamic modeling, wind-tunnel testing, and relentless refinement so you can enjoy no-holds-barred aero domination. With a variance in width of just a single centimeter from rim to hub, the Super-9 is almost invisible to the wind. Plus the wide rim creates a virtually seamless integration with the tire, increasing aerodynamics and allowing wider tires run at a lower pressure. This diminishes rolling resistance, increases rider comfort, and reduces the chance of pinch flatting. Finally, at just 995 grams, the Super-9 is even suited for the hills so you dominate every type of course.
Zipp Super-9 Disc Carbon Rear Track Wheel (Clincher)
$3,474.99
Zipp’s Super-9 Disc Carbon Track Wheel underwent extensive fluid dynamic modeling, wind-tunnel testing, and relentless refinement so you can enjoy no-holds-barred aero domination. With a variance in width of just a single centimeter from rim to hub, the Super-9 is almost invisible to the wind. Plus the wide rim creates a virtually seamless integration with the tire, optimizing aerodynamics and allowing wider tires and less rolling resistance.
Zipp Super-9 Disc Carbon Rear Wheel (Clincher)
$3,649.00
Equip yourself with the wheel that carried Tony Martin to a World Championship and reach the pinnacle of your own potential. Zipp’s Super-9 Carbon Clincher Disc underwent extensive fluid dynamic modeling, wind-tunnel testing, and relentless refinement so you can enjoy no-holds-barred aero domination. With a variance in width of just a single centimeter from rim to hub, the Super-9 is almost invisible to the wind. Plus the wide rim creates a virtually seamless integration with the tire, increasing aerodynamics and allowing wider tires run at a lower pressure. This diminishes rolling resistance, increases rider comfort, and reduces the chance of pinch flatting.
The Wheel Shop Evo E-Tour 20 Silver/Joytech JY-434 24-inch Rear
$39.99
- EVO E-Tour 20 24" single wall rim - Silver - Inner Rim Width: 19.8 mm - Rim Height: 16.8 mm - Pin joint construction - No Eyelets - Schrader valve - 36 holes
The Wheel Shop Evo E-Tour 20/Formula FM-21 26-inch Front
$42.99 - $44.99
- Position Front - Wheel Diameter/ISO 26'' / 559 - Axle Type Bolt-on or QR - Hub Spacing 100mm - Wheel-Brake Comp. Rim - Freehub Body - - Wheel Tire Type Clincher - Rim Material Aluminum - Rim Construction Single wall - Rim Internal Width 19.8mm - Rim inner width range 0-21.9mm - Rim Color Silver - Rim Drilling 36 - Hub Model Formula FM-21 - Wheel Weight - - Spoke Type Steel - Valve Schrader - Rim External Width - - Depth 16.8mm - Rim Model Evo E-Tour 20
The Wheel Shop Alex C1000 Silver/Formula FM-21 24-inch Front
$49.99
- Position Front - Wheel Diameter/ISO 24'' / 507 - Axle Type Bolt-on - Hub Spacing 100mm - Wheel-Brake Comp. Rim - Freehub Body - - Wheel Tire Type Clincher - Rim Material Aluminum - Rim Construction Single wall - Rim Internal Width 19.9mm - Rim inner width range 0-21.9mm - Rim Color Silver - Rim Drilling 36 - Hub Model Formula FM-21 - Wheel Weight - - Spoke Type Steel - Valve Schrader - Rim External Width 25.2mm - Depth 16mm - Rim Model Alex C1000
The Wheel Shop Alex J303/Joytech A075 20-inch Front
$59.99
- Double wall Alex J303 20'' alloy rim - Black - Non-machined black sidewalls - Inner rim width: 21 mm - Outer rim width: 26.9 mm - Rim height: 15.5 mm - No eyelets - Schrader valve - 36 holes - Stainless steel spokes - Black
The Wheel Shop Alex X101/Formula FM-21-QR 700c Front
$59.99
- Position Front - Wheel Diameter/ISO 700C / 622 - Axle Type QR - Hub Spacing 100mm - Wheel-Brake Comp. Rim - Freehub Body - - Wheel Tire Type Clincher - Rim Material Aluminum - Rim Construction Single wall - Rim Internal Width 19.7mm - Rim inner width range 0-21.9mm - Rim Color Silver - Rim Drilling 36 - Hub Model Formula FM-21-QR - Wheel Weight - - Spoke Type Steel - Valve Schrader - Rim External Width 25mm - Depth 16mm - Rim Model Alex X101 - Skewers Included Yes
The Wheel Shop Evo E-Tour 19/Formula DC-20 700c Front
$59.99
- Position Front - Wheel Diameter/ISO 700C / 622 - Axle Type QR - Hub Spacing 100mm - Wheel-Brake Comp. Rim and Disc IS 6-bolt - Freehub Body - - Wheel Tire Type Clincher - Rim Material Aluminum - Rim Construction Double wall - Rim Internal Width 19mm - Rim inner width range 0-21.9mm - Rim Color Black - Rim Drilling 36 - Hub Model Formula DC-20 - Wheel Weight - - Spoke Type Stainless - Valve Schrader - Rim External Width - - Depth 20mm - Rim Model Evo E-Tour 19 - Skewers Included Yes
The Wheel Shop Evo E-Tour 19/Formula DC-20 26-inch Front
$64.99
- Position Front - Wheel Diameter/ISO 26'' / 559 - Axle Type QR - Hub Spacing 100mm - Wheel-Brake Comp. Rim and Disc IS 6-bolt - Freehub Body - - Wheel Tire Type Clincher - Rim Material Aluminum - Rim Construction Double wall - Rim Internal Width 19mm - Rim inner width range 0-21.9mm - Rim Color Black - Rim Drilling 36 - Hub Model Formula DC-20 - Wheel Weight - - Spoke Type Stainless - Valve Schrader - Rim External Width - - Depth 20mm - Rim Model Evo E-Tour 19 - Skewers Included Yes
The Wheel Shop Alex DM-18/Formula FM-31 700c Rear
$84.99
- Position Rear - Wheel Diameter/ISO 700C / 622 - Axle Type Bolt-on - Hub Spacing 135mm - Wheel-Brake Comp. Rim - Freehub Body Freewheel - Wheel Tire Type Clincher - Rim Material Aluminum - Rim Construction Double wall - Rim Internal Width 18.4mm - Rim inner width range 0-21.9mm - Rim Drilling 36 - Hub Model Formula FM-31 - Wheel Weight - - Spoke Type Stainless - Valve Schrader - Rim External Width 24.4mm - Depth 16mm - Rim Model Alex DM18
The Wheel Shop Alex Ace19/Shimano Acera HB-T3000 29-inch Front
$89.99
- Position Front - Wheel Diameter/ISO 700C / 622 - Axle Type QR - Hub Spacing 100mm - Wheel-Brake Comp. Rim - Freehub Body - - Wheel Tire Type Clincher - Rim Material Aluminum - Rim Construction Double wall - Rim Internal Width 17mm - Rim inner width range 0-21.9mm - Rim Color Black - Rim Drilling 32 - Hub Model Shimano Acera HB-T3000 - Wheel Weight - - Spoke Type Stainless - Valve Presta - Rim External Width 22mm - Depth 19.2mm - Rim Model Alex Ace19 - Skewers Included Yes
The Wheel Shop Alex DM-18/Formula FM-31-QR 700c Rear
$89.99
- Position Rear - Wheel Diameter/ISO 700C / 622 - Axle Type QR - Hub Spacing 135mm - Wheel-Brake Comp. Rim - Freehub Body Freewheel - Wheel Tire Type Clincher - Rim Material Aluminum - Rim Construction Double wall - Rim Internal Width 18.4mm - Rim inner width range 0-21.9mm - Rim Color Black - Rim Drilling 36 - Hub Model Formula FM-31-QR - Wheel Weight - - Spoke Type Stainless - Valve Schrader - Rim External Width 24.4mm - Depth 16mm - Rim Model Alex DM18 Skewers Included Yes
The Wheel Shop Alex DM-18/Shimano Acera HB-T3000 700c Front
$89.99
- Position Front - Wheel Diameter/ISO 700C / 622 - Axle Type QR - Hub Spacing 100mm - Wheel-Brake Comp. Rim - Freehub Body - - Wheel Tire Type Clincher - Rim Material Aluminum - Rim Construction Double wall - Rim Internal Width 18.4mm - Rim inner width range 0-21.9mm - Rim Color Black - Rim Drilling 36 - Hub Model Shimano Acera HB-T3000 - Wheel Weight - - Spoke Type Stainless - Valve Schrader - Rim External Width 24.4mm - Depth 16mm - Rim Model Alex DM18 - Skewers Included Yes
The Wheel Shop Alex DM18/ Shimano FH-RM30-7 26-inch Rear
$91.99 - $95.99
- Position Rear - Wheel Diameter/ISO 26'' / 559 - Axle Type QR - Hub Spacing 135mm - Wheel-Brake Comp. Rim - Freehub Body Shimano 7 - Wheel Tire Type Clincher - Rim Material Aluminum - Rim Construction Double wall - Rim Internal Width 18.4mm - Rim inner width range 0-21.9mm - Rim Color Black - Rim Drilling 36 - Hub Model Shimano FH-RM30-7 - Wheel Weight - - Spoke Type Stainless - Valve Schrader - Rim External Width 24.4mm - Depth 16mm - Rim Model Alex DM18 - Skewers Included Yes
The Wheel Shop Alex C1000/Shimano CB-E110 26-inch Rear
$94.99
- Position Rear - Wheel Diameter/ISO 26'' / 559 - Axle Type Bolt-on - Hub Spacing 110mm - Wheel-Brake Comp. Coaster - Freehub Body Coaster - Wheel Tire Type Clincher - Rim Material Aluminum - Rim Construction Single wall - Rim Internal Width 19.9mm - Rim inner width range 0-21.9mm - Rim Color Silver - Rim Drilling 36 - Hub Model Shimano CB-E110 - Wheel Weight - - Spoke Type Steel - Valve Schrader - Rim External Width 25.2mm - Depth 16mm - Rim Model Alex C1000
The Wheel Shop Alex Ace19/Shimano Acera FH-T3000 26-inch Rear
$104.99
- Position Rear - Wheel Diameter/ISO 26'' / 559 - Axle Type QR - Hub Spacing 135mm - Wheel-Brake Comp. Rim - Freehub Body Shimano HG - Wheel Tire Type Clincher - Rim Material Aluminum - Rim Construction Double wall - Rim Internal Width 17mm - Rim inner width range 0-21.9mm - Rim Color Black - Rim Drilling 32 - Hub Model Shimano Acera FH-T3000 - Wheel Weight - - Spoke Type DT Stainless - Valve Presta - Rim External Width 22mm - Depth 19.2mm - Rim Model Alex Ace19 - Skewers Included Yes
The Wheel Shop Alex DA22/Shimano Sora HB-RS300 700c Front
$104.99
- Position Front - Wheel Diameter/ISO 700C / 622 - Axle Type QR - Hub Spacing 100mm - Wheel-Brake Comp. Rim - Freehub Body - - Wheel Tire Type Clincher - Rim Material Aluminum - Rim Construction Double wall - Rim Internal Width 13.9mm - Rim inner width range 0-21.9mm - Rim Color Black - Rim Drilling 32 - Hub Model Shimano Sora HB-RS300 - Wheel Weight - - Spoke Type Stainless - Valve Presta - Rim External Width 19.6mm - Depth 22mm - Rim Model Alex DA22 - Skewers Included Yes
The Wheel Shop Alex DM-18/Shimano HB-M475 700c Front
$104.99
- Position Front - Wheel Diameter/ISO 700C / 622 - Axle Type QR - Hub Spacing 100mm - Wheel-Brake Comp. Rim and Disc IS 6-bolt - Freehub Body - - Wheel Tire Type Clincher - Rim Material Aluminum - Rim Construction Double wall - Rim Internal Width 18.4mm - Rim inner width range 0-21.9mm - Rim Color Black - Rim Drilling 36 - Hub Model Shimano HB-M475 - Wheel Weight - - Spoke Type Stainless - Valve Schrader - Rim External Width 24.4mm - Depth 16mm - Rim Model Alex DM18 - Skewers Included Yes
The Wheel Shop Alex DM18 Black/Shimano Acera FH-T3000 26-inch Rear
$109.99
- Position Rear - Wheel Diameter/ISO 26'' / 559 - Axle Type QR - Hub Spacing 135mm - Wheel-Brake Comp. Rim - Freehub Body Shimano HG - Wheel Tire Type Clincher - Rim Material Aluminum - Rim Construction Double wall - Rim Internal Width 18.4mm - Rim inner width range 0-21.9mm - Rim Color Black - Rim Drilling 36 - Hub Model Shimano Acera FH-T3000 - Wheel Weight - - Spoke Type Stainless - Valve Schrader - Rim External Width 24.4mm - Depth 16mm - Rim Model Alex DM18 - Skewers Included Yes
The Wheel Shop Evo E-Tour 16/Formula TH-51 700c Rear
$109.99
- Position Rear - Wheel Diameter/ISO 700C / 622 - Axle Type Bolt-on - Hub Spacing 120mm - Wheel-Brake Comp. Rim - Freehub Body Fixed/Freewheel - Wheel Tire Type Clincher - Rim Material Aluminum - Rim Construction Double wall - Rim Internal Width 16.6mm - Rim inner width range 0-21.9mm - Rim Color Black - Rim Drilling 32 - Hub Model Formula TH-51 - Wheel Weight - - Spoke Type Stainless - Valve Presta - Rim External Width - - Depth 27mm - Rim Model Evo E-Tour 16
The Wheel Shop Evo E-Tour 16/Formula TH-50 700c Front
$114.99
- Position Front - Wheel Diameter/ISO 700C / 622 - Axle Type Bolt-on - Hub Spacing 100mm - Wheel-Brake Comp. Rim - Freehub Body - - Wheel Tire Type Clincher - Rim Material Aluminum - Rim Construction Double wall - Rim Internal Width 19mm - Rim inner width range 0-21.9mm - Rim Color Silver - Rim Drilling 32 - Hub Model Formula TH-50 - Wheel Weight - - Spoke Type Stainless - Valve Presta - Rim External Width - - Depth 35mm - Rim Model Evo E-Tour 19
The Wheel Shop Alex DA22/Novatec F362TSBT-11 700c Rear
$124.99
- Position Rear - Wheel Diameter/ISO 700C / 622 - Axle Type QR - Hub Spacing 130mm - Wheel-Brake Comp. Rim - Freehub Body Shimano HG 11 - Wheel Tire Type Clincher - Rim Material Aluminum - Rim Construction Double wall - Rim Internal Width 13.9mm - Rim inner width range 0-21.9mm - Rim Color Black - Rim Drilling 32 - Hub Model Novatec F362TSBT-11 - Wheel Weight - - Spoke Type Stainless - Valve Presta - Rim External Width 19.6mm - Depth 22mm - Rim Model Alex DA22 - Skewers Included Yes
The Wheel Shop Alex DM-18/Shimano Deore FH-T610 700c Rear
$124.99
- Position Rear - Wheel Diameter/ISO 700C / 622 - Axle Type QR - Hub Spacing 135mm - Wheel-Brake Comp. Rim - Freehub Body Shimano HG - Wheel Tire Type Clincher - Rim Material Aluminum - Rim Construction Double wall - Rim Internal Width 18.4mm - Rim inner width range 0-21.9mm - Rim Color Black - Rim Drilling 36 - Hub Model Shimano Deore FH-T610 - Wheel Weight - - Spoke Type Stainless - Valve Schrader - Rim External Width 24.4mm - Depth 16mm - Rim Model Alex DM18 - Skewers Included Yes
The Wheel Shop Alex DM-18/Shimano FH-M475 700c Rear
$124.99
- Position Rear - Wheel Diameter/ISO 700C / 622 - Axle Type QR - Hub Spacing 135mm - Wheel-Brake Comp. Rim - Freehub Body Freewheel - Wheel Tire Type Clincher - Rim Material Aluminum - Rim Construction Double wall - Rim Internal Width 18.4mm - Rim inner width range 0-21.9mm - Rim Color Black - Rim Drilling 36 - Hub Model Formula FM-31-QR - Wheel Weight - - Spoke Type Stainless - Valve Schrader - Rim External Width 24.4mm - Depth 16mm - Rim Model Alex DM18 - Skewers Included Yes
The Wheel Shop Alex AT470/Shimano Tiagra FH-RS400 700c Rear
$129.99
- Position Rear - Wheel Diameter/ISO 700C / 622 - Axle Type QR - Hub Spacing 130mm - Wheel-Brake Comp. Rim - Freehub Body Shimano HG 11 - Wheel Tire Type Clincher - Rim Material Aluminum - Rim Construction Double wall - Rim Internal Width 17mm - Rim inner width range 0-21.9mm - Rim Color Black - Rim Drilling 32 - Hub Model Shimano Tiagra FH-RS400 - Wheel Weight - - Spoke Type DT Stainless - Valve Presta - Rim External Width 22mm - Depth 22mm - Rim Model Alex AT470 - Skewers Included Yes
The Wheel Shop Alex DM18/Shimano FH-M475 26-inch Rear
$129.99
- Position Rear - Wheel Diameter/ISO 26'' / 559 - Axle Type QR - Hub Spacing 135mm - Wheel-Brake Comp. Rim and Disc IS 6-bolt - Freehub Body Shimano HG - Wheel Tire Type Clincher - Rim Material Aluminum - Rim Construction Double wall - Rim Internal Width 18.4mm - Rim inner width range 0-21.9mm - Rim Color Black - Rim Drilling 36 - Hub Model Shimano FH-M475 - Wheel Weight - - Spoke Type Stainless - Valve Schrader - Rim External Width 24.4mm - Depth 16mm - Rim Model Alex DM18 - Skewers Included Yes
The Wheel Shop Evo E-Tour 19/Formula TH-51 700c Rear
$134.99
- Position Rear - Wheel Diameter/ISO 700C / 622 - Axle Type Bolt-on - Hub Spacing 120mm - Wheel-Brake Comp. Rim - Freehub Body Fixed/Freewheel - Wheel Tire Type Clincher - Rim Material Aluminum - Rim Construction Double wall - Rim Internal Width 19mm - Rim inner width range 0-21.9mm - Rim Color Silver - Rim Drilling 32 - Hub Model Formula TH-51 - Wheel Weight - - Spoke Type Stainless - Valve Presta - Rim External Width - - Depth 35mm - Rim Model Evo E-Tour 19
The Wheel Shop Alex DA22/Formula TH-50 700c Front
$139.99
- Position Front - Wheel Diameter/ISO 700C / 622 - Axle Type Bolt-on - Hub Spacing 100mm - Wheel-Brake Comp. Rim - Freehub Body - - Wheel Tire Type Clincher - Rim Material Aluminum - Rim Construction Double wall - Rim Internal Width 13.9mm - Rim inner width range 0-21.9mm - Rim Color Black - Rim Drilling 32 - Hub Model Formula TH-50 - Wheel Weight - - Spoke Type DT Champion - Valve Presta - Rim External Width 19.6mm - Depth 22mm - Rim Model Alex DA22 - Skewers Included Yes
The Wheel Shop Mavic A119/Shimano Deore HB-T610 700c Front
$139.99
- Position Front - Wheel Diameter/ISO 700C / 622 - Axle Type QR - Hub Spacing 100mm - Wheel-Brake Comp. Rim - Freehub Body - - Wheel Tire Type Clincher - Rim Material Aluminum - Rim Construction Double wall -Rim Internal Width 19mm - Rim inner width range 0-21.9mm - Rim Color Black - Rim Drilling 32 - Hub Model Shimano Deore HB-T610 - Wheel Weight - - Spoke Type DT Stainless - Valve Presta - Rim External Width 24mm - Depth 17.5mm - Rim Model Mavic A119 - Skewers Included Yes
The Wheel Shop Alex R390/Shimano Sora HB-RS300 700c Front
$144.99
- Position Front - Wheel Diameter/ISO 700C / 622 - Axle Type QR - Hub Spacing 100mm - Wheel-Brake Comp. Rim - Freehub Body - - Wheel Tire Type Clincher - Rim Material Aluminum - Rim Construction Double wall - Rim Internal Width 13.4mm - Rim inner width range 0-21.9mm - Rim Color Black - Rim Drilling 32 - Hub Model Shimano Sora HB-RS300 - Wheel Weight - - Spoke Type DT Stainless - Valve Presta - Rim External Width 19.6mm - Depth 19.7mm - Rim Model Alex R390 - Skewers Included Yes
The Wheel Shop Mavic A119/Shimano Acera FH-T3000 700c Rear
$149.99
- Position Rear - Wheel Diameter/ISO 700C / 622 - Axle Type QR - Hub Spacing 135mm - Wheel-Brake Comp. Rim - Freehub Body Shimano HG - Wheel Tire Type Clincher - Rim Material Aluminum - Rim Construction Double wall - Rim Internal Width 19mm - Rim inner width range 0-21.9mm - Rim Color Black - Rim Drilling 32 - Hub Model Shimano Acera FH-T3000 - Wheel Weight - - Spoke Type DT Stainless - Valve Presta - Rim External Width 24mm - Depth 17.5mm - Rim Model Mavic A119 - Skewers Included Yes
The Wheel Shop Mavic A119/Shimano Deore HB-M525 700c Front
$149.99
- Position Front - Wheel Diameter/ISO 700C / 622 - Axle Type QR - Hub Spacing 100mm - Wheel-Brake Comp. Rim and Disc IS 6-bolt - Freehub Body - - Wheel Tire Type Clincher - Rim Material Aluminum - Rim Construction Double wall - Rim Internal Width 19mm - Rim inner width range 0-21.9mm - Rim Color Black - Rim Drilling 32 - Hub Model Shimano Deore HB-M525 - Wheel Weight - - Spoke Type DT Stainless - Valve Presta - Rim External Width 24mm - Depth 17.5mm - Rim Model Mavic A119 - Skewers Included Yes
The Wheel Shop Alex R390/Shimano HB-RS400 700c Front
$154.99
- Position Front - Wheel Diameter/ISO 700C / 622 - Axle Type QR - Hub Spacing 100mm - Wheel-Brake Comp. Rim - Freehub Body - - Wheel Tire Type Clincher - Rim Material Aluminum - Rim Construction Double wall - Rim Internal Width 13.4mm - Rim inner width range 0-21.9mm - Rim Color Black - Rim Drilling 32 - Hub Model Shimano Tiagra HB-RS400 - Wheel Weight - - Spoke Type DT Stainless - Valve Presta - Rim External Width 19.6mm - Depth 19.7mm - Rim Model Alex R390 - Skewers Included Yes
Page 1 of 6 Next page