Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Parts & Accessories

Stan's NoTubes Presta Removeable Valve Core
$4.99
Stan's No Tubes' Presta Removable Valve Core is a replacement valve core for Stan's No Tubes Presta valve stems and Presta valve equipped rim strips.
Shimano Alfine SG-S700 Right Lock Washer Seal
$8.99
Do you need to replace the right lock washer seal on your Alfine SG-S700 internally geared hub? If you're not sure, it might not be a bad idea, as contamination from damaged or worn seals is the kryptonite of virtually maintenance-free internally geared hubs.
Shimano Alfine S700 Small Parts Kit
$20.99
Add an Alfine hub, cog, spokes, and a rim to this Shimano Internally Geared Hub Small Parts Kit, and you're ready to rock. - Alfine hubs are packaged without small parts and require this kit plus a cog - Nexus hubs are packaged with small parts and cogs and do not require an additional small parts kit - For 11-Speed Hub - Includes CJ-S700 Cassette Joint for Vertical Dropouts *Cassette joint does not fit Di2 Alfine hubs
Shimano Alfine SG-S700 11-Speed Internal Assembly
$544.99
This is a set of replacement internals for Alfine SG-S700 11-Speed internally geared hubs, allowing you to reuse your old Alfine shell with brand new internals, making it like a new hub. - 187mm axle width
Stan's NoTubes Neo Front Hub End Caps
$29.99 - $31.99
Front end cap conversion kits for NoTubes Neo and Neo Ultimate - SealLock end caps feature a low friction U-cup seal that snaps into place
Stan's NoTubes Neo OS Front Hub Torque Caps
$35.99
Front RockShox/SRAM-specific Torque-Cap 15mm through-axle SealLock end caps for Neo OS and Neo Ultimate OS hubs. SealLock end caps feature a low-friction U-cup seal that snaps into place and stays secure even when your wheel is removed from your bike. Torque-Cap end caps have the same 15mm inside diameter as other systems, but outside diameter is larger (31mm), making these end caps only compatible with Torque-Cap-compatible forks. Note: Torque caps are not compatible with centerlock hubs.
Stan's NoTubes Neo Rear Hub End Caps
$31.99 - $35.99
Rear end cap conversion kits for NoTubes Neo and Neo Ultimate hubs - SealLock end caps feature a low friction U-cup seal that snaps into place
Stan's NoTubes Neo Replacement Rear Axle
$29.99
Replacement rear axle for Neo and Neo Ultimate hubs. High-precision center-less ground treatment ensures perfect bearing fit.
SRAM Maxle DH Front MTB
$80.00
Who knew we could make a thru axle disappear? The new Maxle Stealth offers a light, low profile alternative to Maxle Lite. - Hub OLD 20x110 - Length 158mm - Thread Length 10mm - Thread Pitch M20x1.50 - BoXXer C1 (2019+) - 34g lighter than Maxle Lite - Easy installation with a 6mm Allen wrench - Compatible with all 15mm forks
Stan's NoTubes Threaded Valve Extenders
$37.99
Stan's Threaded Valve Extenders let you convert deep-section rims to tubeless. They're precision-machined from aluminum and are designed to fit deep-dish carbon and aluminum rims. And, they're threaded on the outside so you can install the Presta lock-ring nut for a perfect seal.
Stan's NoTubes Standard Tubeless Kit
$109.99
Going tubeless allows you to run low tire pressure for better traction while drastically reducing the chances of a flat. Stan's Standard Tubeless Kit converts standard tubed wheels to tubeless so you can reap the benefits. Everything you need to go tubeless is included. Plus, you won't miss dealing with flat tires and you'll save money on tubes!
Blackburn Rack Fit System Long Quick Release
$36.99
Rack Fit System Long Quick Release. Compatible with: - Outpost Front Rack - Outpost Rear Rack - Central Rear Rack - Interlock Rear Rack
Spank Oozy/Spike Rear Hub 3 Pawl & Spring Kit
$12.99
Replacement Pawls for all Oozy hubs.
Crank Brothers Front Endcaps Kit
$52.99
9/15/20mm conversion kit for current generation front hubs - Cobalt endcaps – These kits convert current generation Cobalt front wheels to 9/15mm thru-axle. - Iodine/Opium endcaps - These kits convert current generation Iodine and Opium front wheels to 9/15/20mm thru-axle. - Conversion: 9/15/20mm - Cobalt weight: 26g (9mm) / 16g (15mm) - Iodine/Opium weight: 28g (9mm) / 18g (15mm) / 23g (20mm)
SRAM Conversion Cap & XD Driver Body for Roam 60/50 and Rail 50 Wheel
$174.99 - $187.99
Convert your SRAM Roam 60, 50 or Rail 50 wheels to SRAM 11-speed with the XD Driver Body and Axle Cap. XD is a cassette driver body that allows the use of a 10-tooth small cog and provides an improved interface with the cassette. The axle cap is specific to the XD driver and your preferred axle choice.
Zipp Dual Wheel Bag
$217.99
The most important transitions isn't T1 or T2; it's the transition from home to the race, so protect your wheels with Zipp's Wheel Bag. It's designed to hold two wheels inside a padded pocket, and it features a stuff sack for race supplies.
SRAM Conversion Cap & 9/10-speed Driver Body for Roam 60/50 and Rail 50 Wheel
$174.99 - $187.99
SRAM's Conversion Cap & 9/10-speed Driver Body is just what you need to convert your XD Driver equipped wheel to a standard cassette.
SRAM XD Driver Body for Rise 60 Wheel
$84.99
XD is a cassette driver body that allows the use of a 10-tooth small cog and provides an improved interface with the cassette on your SRAM Rise 60 wheels. • Driver body design that lets riders tap the power and range of the SRAM 10-42 11-speed Cassette and a 10-tooth small cog • Provides a stable hub connection
WeThePeople Supreme Hub Guards
$35.99 - $59.99
Simply replace the cones on your Supreme front and cassette hubs for a perfect fit without having to spread your dropouts. Available in front, rear, and drive side options. These guards now feature a heat-treated chromo insert for longer life.
WeThePeople Supreme Front Axle/Cone Set
$46.99
This is an axle and cone set for WTP Supreme hubs. Pop this in to freshen up that bombed-out hub after too many aerial ghost rides.
WeThePeople Supreme Hub Pawl Set
$39.99
Supreme Hub Pawl Set, 6 Pieces Including Spring
WeThePeople Helix Driver Guard
$35.99 - $47.99
When you own a freecoaster as good as the Helix, you're going to want to keep it protected. WTP's Helix driver guards work on the drive side of the Helix freecoaster and replace the cones for a perfect fit without having to spread your dropouts. - Fits Helix V1 and Helix V2 freecoaster hubs - Available in 7075-T6 alloy or Nylon Fiberglass - Comes with heat-treated chromoly adaptor to replace hub cone nuts for perfect fit
WeThePeople Helix Hub Guard
$35.99 - $41.99
When you own a freecoaster as good as the Helix, you're going to want to keep it protected. WTP's Helix hub guards work on the non-drive side of the Helix freecoaster and replace the cones for a perfect fit without having to spread your dropouts. - Fits Helix V1 and Helix V2 freecoaster hubs - Available in 7075-T6 alloy or Nylon Fiberglass - Comes with heat-treated chromoly adaptor to replace hub cone nuts for perfect fit
Spank Spoon 135 Rear Hub 10x135mm Adaptor
$49.99
10x135mm adapter for SPOON 135 Rear Hubs. Compatible with SPIKE and SPOON wheels produced from 2011-2015 (built with SPOON hubs). Not compatible with 2016 SPIKE or SPOON wheels (built with SPIKE hubs). Not compatible with Spike Race28 Enduro Wheels. Material: Alloy / Steel Weight (g): ±37 Compatibility: SPOON 12x135mm Rear Hubs
Spank Spoon 20 Front Hub 20x110mm Adaptor
$24.99
20x110 adapter for SPOON 20 Front hubs. Compatible with SPIKE and SPOON wheels produced from 2011-2015 (built with SPOON hubs). Not compatible with 2016 SPIKE or SPOON wheels (built with SPIKE hubs). Not compatible with Spike Race28 Enduro Wheels. Material: Alloy Weight (g): ±20 Compatibility: SPOON front hubs
Spank Spoon 135 Rear Hub 12x142mm Adaptor
$86.99
12x142mm adapter for SPOON 135 Rear Hubs. Compatible with SPIKE and SPOON wheels produced from 2011-2015 (built with SPOON hubs). Not compatible with 2016 SPIKE or SPOON wheels (built with SPIKE hubs). Not compatible with Spike Race28 Enduro Wheels. Material: Alloy / Steel Weight (g): ±37 Compatibility: SPOON 12x135mm Rear Hubs
Stan's NoTubes Neo Hub Spring and Pawl Kit
$12.99
Replacement springs and pawls. Includes 6 pawls, 6 springs and 1 plastic retaining ring that holds the pawls in place even during disassembly to ensure you're never searching the floor for tiny springs.
Zipp 11-speed Freehub Kit for 177 Hub
$188.00 - $189.99
Zipp Speed Weaponry Freehub Bodies - Material: Aluminum
Stan's NoTubes Neo Speedsync Freehub
$179.99 - $199.99
Stan's original Neo hub has evolved to be stronger and more reliable than ever. The additional stress of larger cassette cogs, more capable bikes, and even more challenging trails led to the creation of the Neo with Speedsync. This CNC machined Speedsync freehub is a direct replacement for your Neo hub and includes pawls, springs, pawl retaining ring, and 2 red freehub spacers. Bearings are pre-installed. Note: - Singlespeed freehub cannot be used to convert a hub originally set up with a Shimano or Sram XD freehub to SS. This freehub is only to be used with Stan's Neo SS hubs. - OneUp freehub WILL NOT WORK with a SRAM cassette or Shimano cassette without a One Up Shark Cluster.
Wheels Manufacturing Inc. Axle Spacers
$24.99
Wheels Manufacturing Axle Spacers help you dial in your hub spacing to ensure correct fit and side-to-side spacing in the rear triangle without having to alter the wheel's dish. - Spacers come in bags of 20
Wheels Manufacturing Inc. Axle-12
$29.99
Wheels Mfg axles are made from aircraft quality 4130 alloy steel, made specifically for Wheels Mfg. It’s heat-treated to increase strength without making the axle brittle. Rolled threads make for easy assembly of cones & locknuts. - Fits many Taiwanese hubs with 135mm spacing - Type: Hollow Axle - Threads: 9.5mm x 26tpi - Diameter: 9.5mm - Length: 146mm - 1 axle per bag
Wheels Manufacturing Inc. CN-R063 Cone
$13.99
Wheels Manufacturing cones are precision machined to Shimano Ultegra or higher quality standards. This ensures that our cones fit correctly, run smoothly and have a long service life. - Compatible with Shimano Rear 10mm x 1 axle - Shimano Left Rear Cone - Cone Wrench Size: 15mm - Threads: 10mm x 1 - Cone Diameter: 17.0mm - Dust Seal Diameter: 25.5mm - Length: 16.0mm - 1 cone per bag COMPATIBLE HUBS: - XT M737, 8-spd Rear - STX-RC MC38, 8-spd Rear - STX/STX-RC MC30/32/33, 7-spd Rear - Alivio MC18, 8-spd Rear - Alivio MC12, 7-spd Rear - Acera-X MC290, 7-spd Rear - Altus RM-40, 7-spd Rear - FH-R080 Silent Hub, 8-spd Rear - FH-R050 Silent Hub, 7-spd Rear
Spank Oozy/Spike Rear Hub Adaptors
$29.99
Hub Adapters for all Oozy hubs and 2016 Spike hubs.
Zipp 11-speed Freehub Body for 30/60 Wheels
$89.99
Zipp Speed Weaponry Freehub Bodies - Material: Aluminum
Spank Spoon 135/150 Rear Hub 4 Pawl & Spring Kit
$12.99
Replacement Pawls for Spoon hubs.
Spank Oozy/Spike Freehub Bodies
$132.99
Replacement cassette bodies for Oozy hubs and Spike hubs. - Shimano or SRAM - Alloy or Steel
Zipp Tubeless Kit
$79.99
- Kit includes tape, 2 valves & 1 valve core wrench
Wheels Manufacturing Inc. CN-R084 Cone
$14.99
Wheels Manufacturing cones are precision machined to Shimano Ultegra or higher quality standards. This ensures that our cones fit correctly, run smoothly and have a long service life. - Fits: Joytech 9mm x 26, front hub - Compatible with 9mm x 26 axle - Cone Wrench Size: 13mm - Threads: 9mm x 26 - Diameter: 15.0mm - Length: 12.8mm - 1 cone per bag - Note: O-ring / seal not included. COMPATIBLE HUBS: - Joytech 9mm x 26, front hub - Taiwanese hubs with 9mm x 26 axle - 105 SC 1055 8-speed Rear - 105 SC 1056 7-speed Rear - XT-II M732 7-speed Rear
Stan's NoTubes Alloy Tubeless Valve Stems
$35.99
Stan's lightweight aluminum valve stems are half the weight of Stan's standard brass valves. The secure round base is compatible with most tubeless rims and a perfect fit for all Stan's BST rims. A removable valve core makes adding sealant easy, and these babies fit up to 8mm valve hole. Sold as a pair.
Spank Oozy/Spike Front Hub Adaptors
$29.99
Hub Adapters for all Oozy hubs and 2016 Spike hubs.
Kink Universal Freecoaster Guard
$27.50
The Kink Universal Freecoaster Guard is designed to fit with most modern freecoaster hubs. It features a threaded chromoly core that replaces the hubs existing cone nut(s) and also includes a spacing washer for hubs using a wider cone. The nylon guard itself fits over the chromoly core and is injection-molded from an ultra-durable nylon material. This guard fits on the non-drive side only.
Profile Design Wheel Bag
$99.99
Keep your high-dollar road hoops and tires safe from dings, dents and cuts with Profile Design's Wheel Bag. This large padded bag holds both your wheels and has a carrying handle and shoulder strap for easy handling. There's a zipper and Velcro closure to ensure the bag stays closed and your wheels stay safe and protected. Plus, there's a handy interior storage compartment for your quick releases and other wheel accessories and tools.
Zipp Decal Set
$27.20 - $32.99
These die-cut borderless decals provide a distinctive look to go with the distinctive sound and aero-advantage of Zipp wheels rolling at 45km an hour. Zipp’s Matte white and Matte black decals also are still available. Each decal kit has seven decals sufficient to cover one wheel and two matching valve-hole decals. Note: Before applying the decals, make sure the rim surface is free of dirt and debris. We recommend a gentle wipe with acetone or rubbing alcohol. Peel the white backing sheet from the decal, orientate, position and gently press the decal onto the rim surface. Starting at one end, remove the surface clear cover slip and then work the decal into the dimples using a 3M squeegee.
Zipp 11-Speed Freehub Kit for 2013 - Current 188 Hub
$189.99
This 11-speed freehub is only compatible with model-year 2013 (V8) and 2014 (V9) Zipp wheelsets. Check that your hub has a black end cap before using this freehub. Use the spacer for compatibility with 10-speed Shimano and SRAM drivetrains after installation. The red freehub is designed for SRAM or Shimano drivetrains and includes a spacer for 10-speed compatibility. The blue freehub is designed for Campagnolo drivetrains. The Campagnolo version requires one 0.25mm axle washer, which is included. - 10 to 11-speed wheel conversion can only be completed by an authorized Zipp Service Center - Not intended to convert older 10-speed freehub wheels to 11-speed freehub wheels - Only intended to swap freehub compatibility (SRAM/Shimano - Campagnolo) with current 11-speed wheels - Includes cassette spacer - Material: Aluminum
Zipp Single Wheel Bag
$94.99
- Holds one wheel securely for transport (up to 700c with 35mm CX tire installed). - Connects to second Zipp Connect wheel bag to transform into a double wheel bag. - Sturdy water-resistant EVA construction. - Includes removable axle/QR pocket.
Zipp 77/177 Disc Conversion Caps
$25.00 - $32.99
Zipp Speed Weaponry Hub Conversion Caps
Wheels Manufacturing Inc. Freewheel/BB Spacer
$16.99 - $23.99
Machined aluminum spacers for freehubs. Great for fine tuning freewheel and cassette placement or improving chainline. Also good for bottom bracket spacing with BSA BB cups. - Inner Diameter: 35.0mm - Outer Diameter: 40.7mm - Material: Aluminum - Finish: Polished - Bags of 10
DT Swiss Prolock Hexhead Alloy Nipples
$113.99
- ProLock: pre-prepped/treated nipple threads with special compound - Hexhead (14g only) design for building/truing at nipple head, in addition to 4-sided flats at rim protrusion - Form-A design assures smooth fit and build - Cold-forged nipple blank machined to DIN 79012 specs - 14mm overall length (2mm taller hexhead for wrench interface, but protrusion through rim is the same as a 12mm DT nipple) - 2.0mm (14g) spoke thread interface with full run-through - Made in Switzerland. - Box/100
SRAM X0 Hub Conversion Caps
$24.99 - $35.99
SRAM's X0 conversion caps are the ticket for converting your X0 hubs to a different axle type.
Stan's NoTubes Neo OS Front Hub End Caps
$31.99 - $34.99
Front SealLock end caps for Neo OS and Neo Ultimate OS hubs. SealLock end caps feature a low-friction U-cup seal that snaps into place and stays secure even when your wheel is removed from your bike. Not compatible with non-OS hubs or Centerlock hubs.
Stan's NoTubes Tubeless Valve Stems
$25.99
Use Stan's Tubeless Valve Stems when you're converting standard rims to tubeless via the taping method. These also have a removable core for easier application of tire sealant. Note: Schrader valve is for non-stepped Hugo rims. If your Hugo rim decal reads: - MAX RIM PRESSURE: 2.8 tires: 26psi, 3.0 tires: 24psi - ERD 615, 622x49.9, 29 in x 52.3mm Your rim has a stepped valve and is not compatible with this Schrader valve.
Spank Oozy/Spike Rear Hub 135mm/142mm Axle Shafts
$20.99
Replacement axle for all Oozy hubs and 2016 Spike hubs.
Shimano Alfine SG-S700 Oil Port Bolt
$11.49
Keeping contamination out of your internally geared hub is critical to its function and longevity. Sometimes, the oil port bolt comes loose and it's easy to lose, even if you've just taken it out to oil your hub. Keep a spare or two so your hub stays clean inside and it'll last you many, many miles.
Stan's NoTubes XD Freehub Conversion Kit (Stan's 3.30 Hubs)
$163.99
This conversion kit allows you to use SRAM's 11-speed mountain cassette on your Stan's NoTubes wheels. Each kit includes an XD freehub, spacer, drive side end cap, and three sealed bearings.
Zipp Rotor Protector
$27.00
Help ensure your rotors are not damaged, contaminated in transit, or in storage with this simple solution. This also helps protect anything that may come into contact with the rotor during transport. - Protects rotors during transit - Neoprene cover to protect against water and grease - Reinforced gusset and drawstring to protect the edges of the rotor and to cinch down tightly during transit
WeThePeople Supreme Rear Bearing Set
$35.99
Did you trash the bearings on your WTP Supreme rear hub? It's okay, that just means you're going big enough to make it count. Fear not, we've got you covered with this bearing set from WeThePeople.
WTB TCS AL 46mm Presta Valve
$38.99
WTB's TCS AL valves are aluminum to shed grams, and come in catchy anodized red, black, or blue. A stepped lock nut adds compatibility among various rim drillings, a smooth pump interface makes adding air easy, and a removable core makes setting beads and injecting sealant a cinch. - Presta - 46mm
Spank Spoon 150 Rear Hub 12x157mm Adaptor
$49.99
12x157mm adapter for SPOON 150 Rear Hubs. Compatible with SPIKE and SPOON wheels produced from 2011-2015 (built with SPOON hubs). Not compatible with 2016 SPIKE or SPOON wheels (built with SPIKE hubs). Not compatible with Spike Race28 Enduro Wheels. Material: Alloy Weight (g): ±37 Compatibility: SPOON 12x150mm Rear Hubs
Shimano Alfine SG-S700 Right Hand Cone
$12.49
New cones make hubs spin like silk. Take advantage of your Shimano Alfine hub's highly serviceable design, and replace the bearing cones if they are worn or damaged. This one is specifically for the right side.
Stan's NoTubes Standard Rim Strip
$36.99
Stan's Standard Rim Strip converts standard tubed wheels to tubeless so you can reap the benefits. Going tubeless allows you to run low tire pressure for better traction while drastically reducing the chances of a flat. Stan's rim strips create a tight seal with the tire bead, reducing the instances of "burping". Plus, you won't miss dealing with flat tires and you'll save money on tubes!
Page 1 of 3 Next page