Safety

New patented thumb trigger improves strike force and volume. - 36mm alloy dome - Adjustable position - Ring sound: DING!

Pack of two yellow reflective stickers. - Each sticker measures 35 mm x 105 mm - Perfect for increasing the visibility of bikes and helmets

Snap on some visibility! - Snaps onto ankle or arm - Size: 32cm x 3cm

40mm alloy dome - Fits 31.8mm bars - Ring sound: DING!

Install it only when you need it! - Innovative adjustable mount fits 20 - 32mm bars - Installs and releases in seconds without tools - Ring sound: DING!

Traditional 'push-push' mechanism - 53mm alloy dome - Ring sound: BRRRing!

Innovative attachment bands fit 22.2 - 31.8mm bars - Installs and releases in seconds without tools - Ring sound: DING!

Dring-Dring ring sound - Fun bell for the crazy critters in your life - 55mm wide by 30mm deep - Sturdy twin-screw clamp mount

Rear 'Stinger-dinger' - Ring sound: DING!

Dolphin Horn for kids' bikes.

The stealth bell tucks away neatly next to the stem and provides an un-stealthy Ding!!! sound when activated.

Water-resistant saddle cover with silver reflective band on the rear. - Hook-and-loop fastening ensures a good fit on different sizes of saddles

- Can be used on arm, leg, backpack, or bike - 4-LED design for 360 visibility - Built-in passive reflective strips - Water resistant - Mode: Flashing Off - CR2032 Battery (included) - 75 hour run time - Sold individually

- Elasticated Velcro strap provides many mounting possibilities - Diffused LED light provides 360 visibility - Built in passive reflective strips - Water-resistant - 2 Modes: Off Steady, On Flashing - CR2032 Battery (Included) - 75 Hour run time

The Emoji Bell emits a classic dring-dring ring sound. - Express yourself with these cheeky bells - 52mm wide by 28mm deep - Sturdy twin-screw clamp mount

- High-visibility vest with wide silver reflective bands for maximum visibility - Elasticated sides for improved fit - Zip fastening

The Basil Portland Bell Brass makes an instant impression. The timeless silver finish ensures an easy complement to almost any bicycle frame, while the bell itself is easily mounted to your frame, with no complex installation to worry about. When rung, this bell emits an audible sound that’s loud enough to alert other cyclists, motorists and pedestrians of your presence.

- Durable all steel trigger bell - Floral feminine pattern - Bell diameter: 80mm

- Suitable for most bicycle frame styles. - Due to the clear dong sound, you're always audible to other road users. - This large bicycle bell is suitable for permanent attachment to the steering axis of your bicycle. - 80mm

- Bell diameter: 60mm

- Bell diameter: 60mm

- Durable all steel trigger bell - Polka dot pattern - Bell diameter: 80mm

- Durable all steel trigger bell - Polka dot pattern - Bell diameter: 80mm

This lightweight, small mirror from Blackburn adheres directly to your helmet for a great rearview to make all your rides safer. It can be removed in seconds, too. - This product is covered by blackburn’s limited lifetime warranty. - Weight: 1.6 oz

Snugs securely into the end of your flatbars for instant superhero powers. Constructed of lightweight yet durable plastic. - Our mirrors don't weigh much but offer you a ton of visibility - Easily mount these convenient mirrors directly on your handlebars - 4oz - Lifetime warranty

A convenient mount design allows you to securely attach to the hoods of your road bike. A lightweight and durable plastic construction, this is a must-have safety accessory for anybody on the road for many hours a week. - Our mirrors don't weigh much but offer you a ton of visibility - Easily mount these convenient mirrors directly on your handlebars - 3.2oz - Lifetime warranty

Aluminum bell with a 360-degree, ribbed lever.

Aluminum bell with ribbed lever NOTE: 22.2mm diameter clamp. This bell will only fit smaller-diameter handlebars.

Hit the lever once, it rings twice! Sleek and small aluminum bell. - Sound Volume: 87.0dB - Handlebar size: 22.2mm - Bell Diameter: 33mm - Weight: 27g

CatEye's Flex Tight bell may be tiny but it packs a huge ding to let everyone know you're coming.

Tool-free mount attaches quickly to handlebars 19-32 mm. Aluminum 30mm diameter bell can also be mounted with a light or computer FlexTight™ bracket. - Sound Volume: 90.0dB - Handlebar size: 22-32mm - Bell Diameter: 33mm - Weight: 25g

- Complete, high quality bicycle reflector set - Includes 1x RR-165-BPR Rear reflector (red), 1 x RR-165-BP2W front reflector (white) and 2x RR-550N-WUW wheel reflectors (white) - Also includes brackets to mount on most seatposts and handlebars

The sleek and ultralight BM-45 bar end mirror easily attaches to drop and flat bars, making it perfect for all bikes. Constructed of aluminum and glass for durability and nearly distortion-free viewing, the BM-45 represents the height of handlebar mirror construction and design. Minimal projection from the bar means never having to sacrifice clean aesthetics for critical rear-view safety again.

The perfect way to say 'Hello.' Or 'hey there,' 'coming through' and 'sup.' We've made ringing an art form. Spice up your handlebars with our unique graphics and bold colors. Let people know you’re coming through—and do it in style. - Easy-to-push lever creates a friendly ringing sound - Fits standard bicycle handlebar - Includes attachment hardware - Mounting Location: Handlebar - Clamp: Universal - Material: 7075 Aluminum Alloy

The best thing to happen to handlebars since grips. - Easy to push lever creates friendly ringing sound - Fits standard bicycle handlebar - Includes attachment hardware

A bicycle bell with a quality sound is how you say hello in Electra. - Easy to push lever creates a friendly ringing sound - Fits standard bicycle handlebar - Includes attachment hardware

- Tool-free installation and adjustment - Compatible with 19 – 22mm inner diameter bars

Fits 22-25.4mm Handlebars

- Fits 22-25.4mm Handlebars

Fits 22-25.4mm Handlebars

- Fits 22-25.4mm Handlebars

- Fits 22-25.4mm Handlebars

Fits 22-25.4mm Handlebars

- 1.5" diameter convex mirror for wide viewing angle - Mounts left or right side - Self-adhesive mounting base with detachable arm - Telescoping arm adjusts from 5" to 8" - Mirror rotates 360°

- Double sided high visibility material - Safety orange color - Flexible 2-piece mounting pole - Standard axle mounting bracket included - Red reflector

Fits 22-25.4mm Handlebars

- 3" diameter convex mirror for wide viewing angle - Mount left or right side - Perfect for MTB, hybrid, or commuter handlebars - Bar end mount adjusts to fit 15-22mm inner diameter - Swing arm offers full range adjustment on 3 axes and folds for storage/transport

- 3" diameter convex mirror for wide viewing angle - Mount left or right side - Perfect for MTB, hybrid, or commuter handlebars - Bar end mount adjusts to fit 15-22mm inner diameter - Easy adjustment with 3 pivot points

- Lightweight - Easy to install (suggested for left side) - Stays in place

- Screw-on expending plug designed to stay tightly in place - Easily folds away to facilitate transportation and storage - Tool-free adjustment - Compatible with most handlebars

Features - Simple and smart design - Crisp sounding brass bell - 22.2mm handlebar clamp

- Set of 18 highly reflective frame stickers - High-grade, German-engineered reflective vinyl - Weatherproof: will last at least 7 years in harsh outdoor conditions - Compatible with any frame material - Available in black or white - Lightweight (5g)

- Set of 12 highly reflective wheel stickers - High-grade, German-engineered reflective vinyl - Weatherproof: will last at least 7 years in harsh outdoor conditions - Compatible with 26'', 27.5'', 29'' and 700c wheels and all rim materials - Rim brake wheels require at least 10mm below the rim brake track for proper installation - Available in black or white - Lightweight (5g)

Little, Light, & Loud! Our Original Incredibell has been redesigned for quick and easy mounting on nearly any handlebar. The pivoting dinger can be rotated to any position.

A new angle on bells. Low and lean looking; very techy too. - Fits handlebars with 22.7mm – 26mm (.0.89" – 1.02") outside diameters

Bike bells generally look & sound a bit ugly. But why? What if they looked sexy & sounded like an angel playing a glockenspiel? A bell with a beautiful tone, but also a remarkable style and choice of materials that embodies a rider’s personality. The Large Oi fits 23.8 to 31.8mm bars e.g. drop bar road bikes and some cruiser / commuters. Please make sure you know where on your handlebar you are going to place the bell (grips or stem) before you order as you may need a different sized bell. THE LOOK Where bells usually protrude up or out, Oi doesn’t. It appears to hover around the handle bars. In one sense, it's discreet. But in another, it stands out as unrecognizable. THE SOUND Knog tested numerous prototypes to get the perfect pitch, length of ring, and volume. With a spring-loaded actuator built into the mount, the strike of the bell is firm and fast, allowing a good balance of volume and longevity of sound. It actually has several pitch tones - one core and several supportive higher tones to ensure it's unmistakable and safely heard. To compare it to a musical instrument, where some bells play a single note, Oi plays a chord. THE MOUNT What about the handle-bar cables? No worries. Built into the shape of the mount is a cable management system. So not only does it allow the bell to look and sound uninterrupted, it also helps gather your cables (for the organizer inside us all). What about getting it on the bar. Again, not a thing. Just pop it over, give the hex screw a quick tighten up, and you're good to go. No sliding down the handlebars, no dismantling and re-assembling.

Bike bells generally look & sound a bit ugly. But why? What if they looked sexy & sounded like an angel playing a glockenspiel? A bell with a beautiful tone, but also a remarkable style and choice of materials that embodies a rider’s personality. The Small Oi fits 22.2mm diameter bars, e.g Mountain bike (near the grips), BMX & some old commuters. Please make sure you know where on your handlebar you are going to place the bell (grips or stem) before you order as you may need a different sized bell. THE LOOK Where bells usually protrude up or out, Oi doesn’t. It appears to hover around the handle bars. In one sense, it's discreet. But in another, it stands out as unrecognisable. THE SOUND Knog tested numerous prototypes to get the perfect pitch, length of ring, and volume. With a spring-loaded actuator built into the mount, the strike of the bell is firm and fast, allowing a good balance of volume and longevity of sound. It actually has several pitch tones - one core and several supportive higher tones to ensure it's unmistakable and safely heard. To compare it to a musical instrument, where some bells play a single note, Oi plays a chord. THE MOUNT What about the handle-bar cables? No worries. Built into the shape of the mount is a cable management system. So not only does it allow the bell to look and sound uninterrupted, it also helps gather your cables (for the organiser inside us all). What about getting it on the bar. Again, not a thing. Just pop it over, give the hex screw a quick tighten up, and you're good to go. No sliding down the handlebars, no dismantling and re-assembling.

Bike bells generally look & sound a bit ugly. But why? What if they looked sexy & sounded like an angel playing a glockenspiel? The Oi Luxe is a bell with a beautiful tone, but also a remarkable style and choice of materials that embodies a rider’s personality. The Oi Luxe is luxe in every sense of the word. Its CNC machined ringer and brass dinger, stitched 'vegan' leather shim, and metal injection molded stainless steel make it a pleasure to have on your handlebars. - Fits 23.8 – 31.8mm handlebars - Weight: 46.5g

Bike bells generally look & sound a bit ugly. But why? What if they looked sexy & sounded like an angel playing a glockenspiel? The Oi Luxe is a bell with a beautiful tone, but also a remarkable style and choice of materials that embodies a rider’s personality. The Oi Luxe is luxe in every sense of the word. Its CNC machined ringer and brass dinger, stitched 'vegan' leather shim, and metal injection molded stainless steel make it a pleasure to have on your handlebars. - Fits 22.2mm handlebars - Weight: 31.5g

Break or crack a Mirrycle mirror without ruining the mounting hardware? This replacement mirror is just the ticket! Replacement Mirror Holder with Mirror. Fits on The Mountain, LTD, Original, and Road Mirrycle Mirrors. - Hardware not included